The Merkur Club of America Forums

I need two master cylinders
thanks

Brake pedal has a tendency to travel near the floor! Obviously this isn't good...I can't locate any fluid leaks. And the brake light in the dash flashes.
What's the issue? M/C, booster, or......
any input appreciated
Larry

Hello
My 89 XR has an electrical issue. With ignition off the condenser fan keeps spinning running battery down.
Is this the relays by driver side headlight the issue?
thanks Larry

Why is the battery lamp in the dash flashing? Just as if it was a turn signal lamp!
thanks

Thanks Joe for the input. However, the car is a C-3 not the T-9. Ford had to have a tool for the removal of the balance!

What is the trick to remove the harmonic balance bolt. Mine is real stubborn on my 89 XR!!!
Is there a tool you can borrow from Oreilly, Autozone, etc....
thanks

What is procedure replacing the ABS Accumulator?
thanks

I have lost a lot of brake peddle. Much travel but at least I still have some brakes in my 88. I bled the brakes and had little or no help in braking. When I depress the brake peddle I hear what I would describe as wheezing! Am I dealing with a failing master cylinder or could the brake booster be t...

My squarish not rounded reservoir sprung a small pinhole leak. I replaced it with the more oval rounded reservoir and it solved my leak or so I thought. When I went to close the hood it was obstructed! The right hood support was striking the end of the reservoir and I did not want to force closing t...

The car is totally stock. No intercooler.

What causes the engine when accelerating to have a slight trailer hitching?
And often when I accelerate and let up the clutch the engine RPMs will drop below
500 (stumbling slightly) but always return to normal range of around 900 RPM?
Thanks

Hi If either the Temperature Blend Door Motor or Air distribution Door Motor fails and are replaced how do you realign the gears so that the EATC module can properly position the doors? In my case the Distribution motor failed and just shrieked and gave a 16 trouble code. I'd imagine the vent motors...

Anyone able to repair a leaking bottle that has a hole in it?
...thanks

Hi Am having issues with my Scorpio's EATC. I get a code 16 flashing in my EATC display. This indicates an Air Distribution Door Motor problem. Has anyone had this problem? If so what was the remedy? Can you also tell me what were the symptoms when this code 16 occurred? ..as usual thanks for any he...

What valve spring and valve stem seals are recommended as replacement for my 89 Scorpio? And any other suggestions on head work when I replace the seals soon.
...thanks