Search found 59 matches

by xrdoc
Fri Jan 01, 2016 11:47 am
Forum: XR4Ti
Topic: Port or header?
Replies: 23
Views: 17864

Re: Port or header?

Hmmmm
by xrdoc
Wed Dec 30, 2015 11:47 am
Forum: XR4Ti
Topic: Replacement for PBR phenolic pistons
Replies: 80
Views: 46114

Re: PBR phenolic pistons

hEaT wrote:FWIW, my PBR fronts seem to seize every year after sitting for the winter. I pretty much budget a reman set of calipers every year. They are total pieces of $#!*.
Ive heard sooooo this many times. Why Ive held back on this upgrade
by xrdoc
Wed Dec 30, 2015 11:41 am
Forum: XR4Ti
Topic: Port or header?
Replies: 23
Views: 17864

Re: Port or header?

Are you running the gnari manifold heat?
by xrdoc
Wed Dec 30, 2015 11:40 am
Forum: XR4Ti
Topic: T5 questions again
Replies: 13
Views: 10288

Re: T5 questions again

Most articles have been contradictory in which years makes and models are t5s, most list 162 on the sheet but dont say this is in fact a t5 and the only real way to tell is pull the bellhousing and look at the bearing cap under the input shaft to tell for sure. Most that have come up for sale around...
by xrdoc
Tue Dec 29, 2015 11:53 am
Forum: XR4Ti
Topic: T5 questions again
Replies: 13
Views: 10288

Re: T5 questions again

Most of those links say you cant but one says you cant, Im not sure. Same with the contradictory BS on which oil to use. So confused. I guess Ill just shelf it
by xrdoc
Mon Dec 28, 2015 5:49 pm
Forum: XR4Ti
Topic: T5 questions again
Replies: 13
Views: 10288

Re: T5 questions again

Thanks for the info heat, I think Ill tell him that when I go get it and use that to bargain on price. I personally have beat the crap out of both t5 and t9s and not (knock on wood) broke one yet. I dont thinkIll scrap it but keep it for a back up.
by xrdoc
Mon Dec 28, 2015 11:42 am
Forum: XR4Ti
Topic: T5 questions again
Replies: 13
Views: 10288

Re: T5 questions again

and is a non wct5 cause its out of a 2.3. That doesn't mean it's not a World Class. I believe the WC started at a certain date and they were all WC after that. the tag number 162 indicates its not a wc. But can I put WC parts in it? The cases are all the same right?I should be able to rebuild the c...
by xrdoc
Sun Dec 27, 2015 5:29 pm
Forum: XR4Ti
Topic: T5 questions again
Replies: 13
Views: 10288

T5 questions again

Have a t5 near me that can be had for cheap out of a 2.3 fox. its tag is a 162 so it has the 3.97 first gear according to my reading, and is a non wct5 cause its out of a 2.3. Now, can I use this tranny and rebuild it with the HD WCt5 rebuild kits that are out there and put the 2.95 first gear in it...
by xrdoc
Thu Dec 17, 2015 6:30 pm
Forum: Project, Photo & Video Phorum
Topic: Been gone for a while. Starting a new addicti--project 88xr
Replies: 11
Views: 14719

Re: Been gone for a while. Starting a new addicti--project

F the cossie lights. sellem and get the mustang ones. Buy 3 pairs for what you can sell the cossies for. Dont bother re wiring the computer just do the switching of the pins in the harness , its wayyyyy easier bud. I hear ya on the CAD$. It sucks. A lot I have my eye on and just cant swing it with t...
by xrdoc
Tue Dec 15, 2015 7:07 pm
Forum: Project, Photo & Video Phorum
Topic: Been gone for a while. Starting a new addicti--project 88xr
Replies: 11
Views: 14719

Re: Been gone for a while. Starting a new addicti--project

Holy Ontarians! Glad to see another one around, sometimes i swear Mike Rob and I are the only ones, your not toooooo far either dude. Let me know if you need a hand or spares I might have them.. Welcome back to the madness
by xrdoc
Sun Dec 13, 2015 8:34 pm
Forum: XR4Ti
Topic: T3/t4 turbo elbow
Replies: 32
Views: 16102

Re: T3/t4 turbo elbow

Your wet leak down test then says you need rings i believe
by xrdoc
Sat Dec 12, 2015 1:06 pm
Forum: XR4Ti
Topic: Port or header?
Replies: 23
Views: 17864

Re: Port or header?

Tried my hand aswell with two center mounts and both went bad. I have a ported e6 and havent had a problem yet , i also recommend the flex pipe right after the downpipe. I am looking into a gnari manifold aswell and am looking forward to the external WG. But no one on here seems to have any input re...
by xrdoc
Sun Jun 28, 2015 1:31 pm
Forum: XR4Ti
Topic: WOT misfire/backfire, no power under boost
Replies: 14
Views: 8699

Re: WOT misfire/backfire, no power under boost

What computer are you running? What did you set base timing at? Whats your tps set at? Def check the sweep for dead spots and that you sweep to 4.5-5.0v @ wot Loss of top end would point towards some of that, aswell as not having an intank pump i would think. Is the intank pump still in the tank? I ...
by xrdoc
Sun Jun 28, 2015 1:16 pm
Forum: XR4Ti
Topic: Godfrey Sub-frame Connectors & Scorpio Spindle Adapters
Replies: 26
Views: 18734

Re: Godfrey Sub-frame Connectors & Scorpio Spindle Adapters

Hey Dean. Have you considered talking to that Sean guy in Newmarket who has all the XR's to see if you could get a shell from him? thought about putting the feelers out to you and your connections rob lol. last time i heard sean has kinda sold all his. The shells he has might be a lil too steep for...
by xrdoc
Fri Jun 26, 2015 9:10 am
Forum: XR4Ti
Topic: Godfrey Sub-frame Connectors & Scorpio Spindle Adapters
Replies: 26
Views: 18734

Re: Godfrey Sub-frame Connectors & Scorpio Spindle Adapters

Brad, Can you remind us why we want Scorpio hubs? Is it for 5 bolt wheels and more wheel choices or are there other benefits like moving the roll center? thanks James Larger bearing size and the bolt pattern i believe opens the doors to almost anything, Isnt it 5 x 114? one of the most common sizes...