Do your dash warning lights come on when you turn the key to on?
Like the oil and battery lights.
Search found 299 matches
- Fri Feb 10, 2017 6:24 pm
- Forum: XR4Ti
- Topic: No fuel pump......
- Replies: 55
- Views: 27907
- Sat Nov 19, 2016 9:45 am
- Forum: XR4Ti
- Topic: 3g swap in stock location with v-belts.
- Replies: 3
- Views: 4083
Re: 3g swap in stock location with v-belts.
http://forum.merkurclub.com/forum/viewt ... lit=3G+alt
Good write up in the above link.
I would suggest spacing out the bracket near the valvecover about 3/8" to 1/2".
Good write up in the above link.
I would suggest spacing out the bracket near the valvecover about 3/8" to 1/2".
- Tue Sep 20, 2016 2:07 pm
- Forum: XR4Ti
- Topic: Rough idle
- Replies: 15
- Views: 8203
Re: Rough idle
Did you monitor the VAM voltage while idling?
If it fluctuates, it could indicate a weak VAM spring.
I think it's around .25v at idle.
If it fluctuates, it could indicate a weak VAM spring.
I think it's around .25v at idle.
- Fri Sep 09, 2016 5:31 pm
- Forum: Project, Photo & Video Phorum
- Topic: 87 Rosso Red stockish build
- Replies: 21
- Views: 21050
Re: 87 Rosso Red stockish build
Got the stance right and suspension aligned. Currently collecting parts for a t5 and supra diff swap. Even made it to a few car shows, one with another XR in attendance. http://i1280.photobucket.com/albums/a495/thille1081/6B7B6CEC-0AD3-4208-8418-B791F907C21A_zpsjml1clms.jpg http://i1280.photobucket....
- Thu Jul 14, 2016 9:28 am
- Forum: XR4Ti
- Topic: Turbo coolant feed into block
- Replies: 3
- Views: 2832
Re: Turbo coolant feed into block
That port on the block uses a 1/4" npt plug.
- Mon Jun 27, 2016 10:31 am
- Forum: Project, Photo & Video Phorum
- Topic: Let see pic's of your XR with killer wheels
- Replies: 104
- Views: 99212
- Thu Jun 02, 2016 10:11 am
- Forum: XR4Ti
- Topic: Alignment Question
- Replies: 8
- Views: 3559
Re: Alignment Question
I just lowered mine about 1.5 inches. In the rear I had about 1/4" total toe out before and about 1/8" total toe in after lowering. Between shimming and slotting the beam mounts a got the camber to -1 from -5. All my heights are the same from side to side. You may have a bent STA. For the ...
- Thu May 26, 2016 9:36 am
- Forum: XR4Ti
- Topic: Intercooler tubing modification.
- Replies: 8
- Views: 4362
Re: Intercooler tubing modification.
What intercooler are you running?
- Thu May 19, 2016 11:35 am
- Forum: Project, Photo & Video Phorum
- Topic: 87 Rosso Red stockish build
- Replies: 21
- Views: 21050
- Tue May 03, 2016 9:09 pm
- Forum: Project, Photo & Video Phorum
- Topic: 87 Rosso Red stockish build
- Replies: 21
- Views: 21050
- Mon May 02, 2016 12:16 pm
- Forum: Project, Photo & Video Phorum
- Topic: 87 Rosso Red stockish build
- Replies: 21
- Views: 21050
Re: 87 Rosso Red stockish build
Thanks, but unfortunately they look way better in the pics than in person,Ray wrote:Your wheels came out amazing!
I still need to do a final sanding on them.
I also need to drop the rear beam to slot the holes for alignment so I don't wreck my new tires.
- Wed Apr 27, 2016 6:31 pm
- Forum: XR4Ti
- Topic: Very strange....
- Replies: 6
- Views: 5119
Re: Very strange....
If the car is making boost but lacking oooomph, try unplugging the knock sensor.
Just listen closely for detonation.
Just listen closely for detonation.
- Wed Apr 27, 2016 6:27 pm
- Forum: XR4Ti
- Topic: Steering wheel adapters...
- Replies: 3
- Views: 1918
- Wed Apr 27, 2016 6:21 pm
- Forum: XR4Ti
- Topic: Fuel line AN adaptors
- Replies: 7
- Views: 6532
Re: Fuel line AN adaptors
I used the Russell fittings with the plastic on mine, but the one that has the threaded collar looks like it would work better. I believe it's 5/16" on both ends on the supply and the return is 1/4" at the rail and 5/16" on the frame. http://i1280.photobucket.com/albums/a495/thille108...
- Wed Apr 27, 2016 6:10 pm
- Forum: Project, Photo & Video Phorum
- Topic: 87 Rosso Red stockish build
- Replies: 21
- Views: 21050
Re: 87 Rosso Red stockish build
Remote TFI made a huge difference. Had a random misfire at operating temp. Idle is now smooth at any temp. Got my new tires mounted, just have a bit more sanding on the wheels. Trying to decide between blacked out centres or center caps. Also thinking about lowering it about an inch. http://i1280.ph...