Search found 861 matches

by jkxr4ti
Sat Sep 01, 2018 10:11 am
Forum: XR4Ti
Topic: Fuel Injector upgrade
Replies: 11
Views: 370

Re: Fuel Injector upgrade

I would suggest you look into the newer Siemens/deka high impedance injectors. These are fast opening and will work great with the MS. They draw much less current and produce less electrical noise than the low impedance injectors. I switched to these after maxing out the stock 35lb then low impedanc...
by jkxr4ti
Thu Aug 30, 2018 8:01 pm
Forum: XR4Ti
Topic: 87-89 Brake MC Kit
Replies: 28
Views: 892

Re: 87-89 Brake MC Kit

I may still have an extra DG master cylinder kit. Let me check and get back to you.
by jkxr4ti
Sun Aug 12, 2018 8:19 am
Forum: XR4Ti
Topic: Catch Can Question
Replies: 20
Views: 1652

Re: Catch Can Question

The T inline with the valvecover and crankcase will work. Larger lines will be better here especially if your considering an open breather. I used one of those summit ones for about 3 months before the drain valve fell out the bottom. Not the best quality. One other item to consider with the open pv...
by jkxr4ti
Sun Aug 12, 2018 8:05 am
Forum: XR4Ti
Topic: Antenna Options
Replies: 6
Views: 225

Re: Antenna Options

I installed one of these amazon/eBay self adhesive glass mount deals about 2 years ago. https://www.amazon.com/FICBOX-Windowshield-Mount-Aerial-Antenna/dp/B06XCBLCBH/ref=mp_s_a_1_7?ie=UTF8&qid=1534075287&sr=8-7&pi=AC_SX236_SY340_QL65&keywords=antenna+fm+auto+glass+mount&dpPl=1&dpID=41QTRB5A7tL&ref=p...
by jkxr4ti
Tue May 29, 2018 4:08 pm
Forum: Classifieds - XR4Ti
Topic: Countour SVT E1 Rims Carlisle Delivery Available
Replies: 0
Views: 197

Countour SVT E1 Rims Carlisle Delivery Available

Have a set that were on my car for a number of years. These are 7/10 condition with no curb rash but not perfect finish. Currently these have some spent 215-55-16 tires on them. Available for delivery to carlisle or pickup near Rochester NY.
Asking 400 for the set.
IMG_2302.JPG
(1.97 MiB) Not downloaded yet
IMG_2301.JPG
(1.95 MiB) Not downloaded yet
by jkxr4ti
Mon Apr 30, 2018 9:14 pm
Forum: XR4Ti
Topic: Electrical Issue
Replies: 1
Views: 197

Re: Electrical Issue

Sounds like it could be fuse link B. I think that might be the one you just replaced a while back. Not sure if the meter would have allowed enough current to open that link. Normally they are fused on the amp terminals at around the max current value +30%. Start by measuring continuity/ohms between ...
by jkxr4ti
Fri Apr 06, 2018 10:46 am
Forum: XR4Ti
Topic: Rear Main Seal Install
Replies: 9
Views: 614

Re: Rear Main Seal Install

Grease and a punch or clutch install tool. Just be sure to put the rag around the punch before you give it a whack.
by jkxr4ti
Thu Apr 05, 2018 5:38 pm
Forum: Carlisle 2018
Topic: Radisson Hotel Reservation Info
Replies: 20
Views: 2663

Re: Radisson Hotel Reservation Info

I have been procrastinating a bit on the planning this year. I just called and booked my room. The lady I spoke with said that the block of MCA rooms was sold out but she had no issue extending the rate and giving me a room with 2 beds. So its definitely worth calling and speaking to a live person t...
by jkxr4ti
Sat Jan 13, 2018 4:10 pm
Forum: XR4Ti
Topic: Clutches
Replies: 5
Views: 561

Re: Clutches

Take a look at stinger performance. They have some good kits that go up to 400 ish torque. http://www.stinger-performance.com/suspensionparts.html http://forum.turboford.org/cgi-bin/ultimatebb.cgi?ubb=get_profile;u=00003314 I bought mine from pyropete125 over on turboford. It's comparable to the sta...
by jkxr4ti
Mon Dec 11, 2017 10:20 pm
Forum: XR4Ti
Topic: Source for brake booster grommet?
Replies: 3
Views: 379

Re: Source for brake booster grommet?

Good find! Were you getting a vacuum leak around that grommet or noticing some wierd brake behavior?
by jkxr4ti
Sat Dec 02, 2017 10:45 am
Forum: General Discussion & Intro Forum
Topic: Greetings - New Member here
Replies: 25
Views: 1768

Re: Greetings - New Member here

Welcome aboard! Just read some of the previous posts. I was running the 215/50/16 tires on countour SVT rims and spacers. They did fit and performance was much improved. The issue now is little to no choice in tires in this size. These were only offered I believe on 2 cars factory; the PT cruiser an...
by jkxr4ti
Tue Nov 21, 2017 8:19 am
Forum: XR4Ti
Topic: Advantage from TC intake?
Replies: 12
Views: 701

Re: Advantage from TC intake?

You may want to check out turboford for flow information.
I seem to remember someone flow bench testing the later style inline intake but I'm not sure on the early version.
by jkxr4ti
Wed Nov 15, 2017 9:53 pm
Forum: XR4Ti
Topic: R&D Hazard Switch stock replacement
Replies: 11
Views: 871

Re: R&D Hazard Switch stock replacement

I posted a bypass for the stock hazard switch a while back. 2 Bosch relays, 2 diodes and a recycled dash switch can get you rid of the hazard mess forever. Craig Madsen just sent me a cruise version of the switch assembly to R and R. I'll report back on that as I've never tried to disassemble the cr...
by jkxr4ti
Wed Oct 25, 2017 8:30 pm
Forum: Classifieds - XR4Ti
Topic: A Variety of Parts for sale. Carlisle Delivery Free!!
Replies: 15
Views: 2344

Re: A Variety of Parts for sale. Carlisle Delivery Free!!

Ryan, the gillis valve is available if your interested still. I can do 25 shipped via Usps.
IMG_1908.JPG
IMG_1908.JPG (494.2 KiB) Viewed 1277 times
by jkxr4ti
Mon Oct 23, 2017 10:00 pm
Forum: Classifieds - XR4Ti
Topic: A Variety of Parts for sale. Carlisle Delivery Free!!
Replies: 15
Views: 2344

Re: A Variety of Parts for sale. Carlisle Delivery Free!!

I have someone tentatively interested in the Gillis valve so your second in line for that Ryan. I'll let you know.