Search found 307 matches

by itking
Thu Jul 18, 2019 11:43 am
Forum: Scorpio
Topic: Coolant Temperature Sender
Replies: 55
Views: 12039

Re: Coolant Temperature Sender

john keefe wrote:
Sun Jul 14, 2019 12:17 am
Bought 2 from Latvia, cost about $19 including shipping. Took a couple weeks. Haven't had a chance to install, but they look well made.
I got mine from Latvia also. I also had not had a chance to install.
by itking
Sat Jun 15, 2019 8:21 am
Forum: XR4Ti
Topic: Euro/horn turn-signal switch conversion to our turn-signal switch with cruise:
Replies: 3
Views: 323

Re: Euro/horn turn-signal switch conversion to our turn-signal switch with cruise:

The solder wire to tab, carefully press pin in place while guiding the wire in the channel.
by itking
Sat Jun 15, 2019 8:20 am
Forum: XR4Ti
Topic: Euro/horn turn-signal switch conversion to our turn-signal switch with cruise:
Replies: 3
Views: 323

Re: Euro/horn turn-signal switch conversion to our turn-signal switch with cruise:

You will have to remove the wire with a solder gun. Carefully use a Dremel to cut the bent metal piece out of the way in the channel the wire will follow up to & to also make a indentation so the tab will be flush with the plastic.
by itking
Sat Jun 15, 2019 8:17 am
Forum: XR4Ti
Topic: Euro/horn turn-signal switch conversion to our turn-signal switch with cruise:
Replies: 3
Views: 323

Re: Euro/horn turn-signal switch conversion to our turn-signal switch with cruise:

First it took apart the broken switch with cruise cause I needed the pin with the tab.

Note. You will have to drill out the rivits carefully.There are 2 other pins that each have tabs which can be used to make the same pin/tab combo. So 1 broken cruise switch can be used to modify 3 euro's.
by itking
Sat Jun 15, 2019 8:15 am
Forum: XR4Ti
Topic: Euro/horn turn-signal switch conversion to our turn-signal switch with cruise:
Replies: 3
Views: 323

Euro/horn turn-signal switch conversion to our turn-signal switch with cruise:

Here's some pictures & comment of what I did. I have it currently working perfectly in Raven.
by itking
Tue Jun 11, 2019 11:48 am
Forum: Carlisle 2019
Topic: Post-Carlisle Survey - Your Input is Needed!!!
Replies: 17
Views: 1680

Re: Post-Carlisle Survey - Your Input is Needed!!!

1. I did not attend. Too much on my plate. 2. NA 3. Looks to be run down a bit. You might want to start shopping around for another place. 4. Wasn't there. 5. I have not seen the T-shirt. 6. I don't do autocross. 7. I would have love to have heard some of these guest speakers, if I would go. 8. I ho...
by itking
Mon Feb 11, 2019 2:11 pm
Forum: General Discussion & Intro Forum
Topic: Hello all!
Replies: 6
Views: 1515

Re: Hello all!

Welcome. Ya pictures of some of these "oddities"?
by itking
Wed Dec 26, 2018 9:01 am
Forum: General Discussion & Intro Forum
Topic: Excited new merkur owner here
Replies: 7
Views: 1422

Re: Excited new merkur owner here

Welcome.
by itking
Fri Sep 07, 2018 7:56 pm
Forum: XR4Ti
Topic: Euro/Horn Turn-Signal Switch Conversion
Replies: 8
Views: 1428

Re: Euro/Horn Turn-Signal Switch Conversion

I just have to put a "SET/RES" decal over the printed on horn decal.
by itking
Fri Sep 07, 2018 7:54 pm
Forum: XR4Ti
Topic: Euro/Horn Turn-Signal Switch Conversion
Replies: 8
Views: 1428

Re: Euro/Horn Turn-Signal Switch Conversion

Waalaa! It works. The hazard switch is shorter, but that works.
by itking
Fri Sep 07, 2018 7:54 pm
Forum: XR4Ti
Topic: Euro/Horn Turn-Signal Switch Conversion
Replies: 8
Views: 1428

Re: Euro/Horn Turn-Signal Switch Conversion

The solder wire to tab, carefully press pin in place while guiding the wire in the channel.
by itking
Fri Sep 07, 2018 7:53 pm
Forum: XR4Ti
Topic: Euro/Horn Turn-Signal Switch Conversion
Replies: 8
Views: 1428

Re: Euro/Horn Turn-Signal Switch Conversion

You will have to remove the wire with a solder gun. Carefully use a Dremel to cut the bent metal piece out of the way in the channel the wire will follow up to & to also make a indentation so the tab will be flush with the plastic.
by itking
Fri Sep 07, 2018 7:49 pm
Forum: XR4Ti
Topic: Euro/Horn Turn-Signal Switch Conversion
Replies: 8
Views: 1428

Re: Euro/Horn Turn-Signal Switch Conversion

First it took apart the broken switch with cruise cause I needed the pin with the tab.

Note. You will have to drill out the rivits carefully.There are 2 other pins that each have tabs which can be used to make the same pin/tab combo. So 1 broken cruise switch can be used to modify 3 euro's.
by itking
Fri Sep 07, 2018 7:47 pm
Forum: XR4Ti
Topic: Euro/Horn Turn-Signal Switch Conversion
Replies: 8
Views: 1428

Euro/Horn Turn-Signal Switch Conversion

I have successfully converted the Europe turn-signal switch to a turn signal switch to a switch with cruise control.

Here's some pictures & comment of what I did.
by itking
Thu Jan 04, 2018 9:49 am
Forum: XR4Ti
Topic: Turbo Studs! Which ones to use?
Replies: 11
Views: 2515

Re: Turbo Studs! Which ones to use?

Thanks.