Search found 1477 matches
- Thu Apr 11, 2024 11:56 am
- Forum: General Discussion & Intro Forum
- Topic: Duratec / Mazda L-Series MZR I4 2.0 / 2.3 / 2.5 Swap
- Replies: 54
- Views: 50355
Re: Duratec / Mazda L-Series MZR I4 2.0 / 2.3 / 2.5 Swap
Brad, are you aware of any exhaust manifold that would be turbocharger ready for the 2.5?
- Thu Apr 11, 2024 8:24 am
- Forum: XR4Ti
- Topic: Where the heck are you guys buying air filters? (stock airbox)
- Replies: 4
- Views: 303
Re: Where the heck are you guys buying air filters? (stock airbox)
Vendors here...
I've also got a few Wix from Rock Auto.
I believe one from my local Oreilly as well.
I've also got a few Wix from Rock Auto.
I believe one from my local Oreilly as well.
- Wed Apr 10, 2024 8:38 am
- Forum: XR4Ti
- Topic: Eibach spring kit specification
- Replies: 0
- Views: 133
Eibach spring kit specification
Just as a reference, specs on the Eibach spring kit which has been discontinued for a long time.
Front (linear spring)
Rate = 97 lbs/in
Length = 12.83"
Rear (progressive spring)
Rate = 231-399 lbs/in
Length = 11.2"
Front (linear spring)
Rate = 97 lbs/in
Length = 12.83"
Rear (progressive spring)
Rate = 231-399 lbs/in
Length = 11.2"
- Tue Apr 02, 2024 4:52 pm
- Forum: Project, Photo & Video Phorum
- Topic: FallenOne121's Project Build
- Replies: 18
- Views: 19672
Re: FallenOne121's Project Build
Eibach Front Coilover 250 lb (Ground Control - Also I advise to order Helper Springs from them and verify they are sending the 47.7 split sleeve to fit Eibach 9.5" x 5.5" 500 lb Rear Springs Part number on the springs? For the Ground control front you get to choose what spring rate you wa...
- Tue Apr 02, 2024 1:05 pm
- Forum: Project, Photo & Video Phorum
- Topic: FallenOne121's Project Build
- Replies: 18
- Views: 19672
Re: FallenOne121's Project Build
Part number on the springs?fallenone121 wrote: ↑Tue Apr 02, 2024 10:36 am
Eibach Front Coilover 250 lb (Ground Control - Also I advise to order Helper Springs from them and verify they are sending the 47.7 split sleeve to fit
Eibach 9.5" x 5.5" 500 lb Rear Springs
- Thu Mar 21, 2024 9:23 am
- Forum: General Discussion & Intro Forum
- Topic: Duratec / Mazda L-Series MZR I4 2.0 / 2.3 / 2.5 Swap
- Replies: 54
- Views: 50355
Re: Duratec / Mazda L-Series MZR I4 2.0 / 2.3 / 2.5 Swap
Time for a little data-point.... If you're looking at doing a 2.5 swap, the most common donor is the 2013 - 2020 Ford Fusion. Millions of them were produced and the engines pretty much last forever, so there's not much demand. You may recall from economics class, large supply, little demand equals ...
- Mon Mar 11, 2024 8:42 am
- Forum: Off-Topic Discussion
- Topic: Gawd I dislike oncoming LED headlights!
- Replies: 4
- Views: 558
- Mon Mar 11, 2024 8:40 am
- Forum: XR4Ti
- Topic: Need some tire thoughts
- Replies: 18
- Views: 1479
Re: Need some tire thoughts
I found a shop here in town that got me a set of Toyo Extensa HP in 195/50/15 but that was awhile ago. It made a big difference in acceleration having such a low profile tire. I’d imagine that’s a big boost in acceleration - the tires are over 6% smaller. Maybe too small for me, but I’ll put the To...
- Thu Mar 07, 2024 9:20 am
- Forum: XR4Ti
- Topic: Fuel fill & Smell
- Replies: 5
- Views: 385
Re: Fuel fill & Smell
As mentioned, evap line to canister is broken, or came off at either end.
- Sun Mar 03, 2024 1:52 pm
- Forum: XR4Ti
- Topic: replace oil pan gasket in car?
- Replies: 14
- Views: 1711
Re: replace oil pan gasket in car?
and thats it...
- Sun Mar 03, 2024 1:49 pm
- Forum: XR4Ti
- Topic: replace oil pan gasket in car?
- Replies: 14
- Views: 1711
Re: replace oil pan gasket in car?
And more...
- Sun Mar 03, 2024 1:48 pm
- Forum: XR4Ti
- Topic: replace oil pan gasket in car?
- Replies: 14
- Views: 1711
Re: replace oil pan gasket in car?
A few photos of the cleaner side...
- Sun Mar 03, 2024 12:05 pm
- Forum: XR4Ti
- Topic: replace oil pan gasket in car?
- Replies: 14
- Views: 1711
Re: replace oil pan gasket in car?
Car is done and back together. Fill everything up and started it last weekend to let it warm up, circulate oil and see if any leaks show up. So far, nothing. Used a few cans of foaming engine cleaner to try and get all the grease and grime off the bottom, then powerwasher. Much cleaner and nice look...
- Thu Feb 29, 2024 12:05 pm
- Forum: Carlisle 2024
- Topic: Attending Carlisle for the first time
- Replies: 8
- Views: 636
Re: Attending Carlisle for the first time
Be at the fairgrounds Friday & Saturday, park with the group.
If you have registered your car, you'll be parked with everyone else.
If you have registered your car, you'll be parked with everyone else.
- Wed Feb 28, 2024 11:15 am
- Forum: Classifieds - Scorpio
- Topic: 88 & 89 parts
- Replies: 35
- Views: 31875