The Merkur Club of America Forums

I wasn't there but I guess this happened. http://www.youtube.com/watch?v=2wvZICY3-Dw

Well I had my First Problem with the new pump. I fuel line that was supplied wasn't fuel safe. it cracked and began spraying fuel upwards and leaked past the ring gasket and eventually onto the ground. I went to the local Schucks dug through their misc. fuel line and snaged a small piece and fixed h...

Thanks! The switch was a concern of mine but I had no wiring diagram for it . I will check that tonight!

I would like to fix the problem, not put a band-aid on it. The fuse is good also

The car will Run! ( when I spray Ether into the Throttle body). When the key is turned to the on position, The fuel pumps do not do the fuel system prime. The pumps themselves have good grounds because when manually powered through the fuse box/relay box they work. The fuel pump relay does click, so...

There is no fuel pressure at the rail. The fuel pumps do not turn on when the key is turned to the on position. Like I said if I manually engage the pumps with a jumper wire from the alternator to the relay, the pumps will work! So where does the actual power supply come from? Does the computer have...

XR died on the way to work. It cranks and cranks and cranks. There is spark. When ether is sprayed, the car will run. Fuel pump fuses are good, Relay clicks, when you jump the relay; power directly to the pumps the pumps come on. All grounds seem to be tight and good. the XR is an 1986. none of the ...

I would like to install a RS 500 intercooler and Rad into my car. A while back there was someone selling on Ebay the combo together, Who was that?

works great, no problems. I have 500 miles on it.

No passport is need until 2009, if you drive across. If you fly in that is a different story.

Don't they need a search warrant to look over your car like that? Since when has rusty rocker panels hurt anyone? damn bureaucrat sycophants. Whoa I feel better!

Does the water temp gauge come with a sender? I would think the best possible place to put the water temp gauge sender would be right after the the water outlet. A good place to put an oil pressure pickup is in the fitting where the turbo feed line comes out.((back left hand corner of the block) loo...

You guys haven't met Model T Ford people it was a $350 car when new and they don't want to pay for anything that cost more than that.

Don't show my girl friend!

looks good to me; but unfortunatley most of those words look like gibberish to me.