Search found 137 matches

by mopman93
Fri Feb 17, 2017 10:10 am
Forum: XR4Ti
Topic: wheel bolt pattern change drill guide
Replies: 8
Views: 2736

Re: wheel bolt pattern change drill guide

I did this freehand years ago for a 4x100 bolt pattern. I took the hubs off, took a t-bird rotor and put the 4x100 pattern on that, then used punches to transfer the pattern to the hub and then drilled em out on a press. Worked great. For the front I drilled the rotor and then bolted the rotor on to...
by mopman93
Fri Feb 17, 2017 10:06 am
Forum: XR4Ti
Topic: Saab 9000 Heater Core
Replies: 16
Views: 6229

Re: Saab 9000 Heater Core

Stock heater core I took out of my care had plastic end tanks........

Stock radiator in my car has plastic end tanks.......

Replacement heater core I put in my car for $70 has plastic end tanks.......

Don't see the need to reinvent the wheel.
by mopman93
Fri Jan 27, 2017 11:50 am
Forum: XR4Ti
Topic: ideal offset for 17x7.5 wheels on xr4ti
Replies: 8
Views: 3776

Re: ideal offset for 17x7.5 wheels on xr4ti

I'm not trying to sell these wheels right now but this is exactly what you're looking for. They don't rub.

http://forum.merkurclub.com/forum/viewt ... 27&t=30843
by mopman93
Fri Jan 27, 2017 11:45 am
Forum: XR4Ti
Topic: Camber eccentric bolts, rear beam, and nylon STA bushings
Replies: 9
Views: 3376

Re: Camber eccentric bolts, rear beam, and nylon STA bushing

Ford Motorsport specs 0* camber and a touch of toe in, like 0.1. The factory rear suspension adds camber through the arc of travel. I have a beam modified with the Ireland Engineering BMW E30 positive locking blocks. Should work out nicely with the poly bushings. My car is maybe 1.5-2" lower than st...
by mopman93
Sat Nov 26, 2016 11:55 pm
Forum: Classifieds - XR4Ti
Topic: 2008 Mazda mx5 long block. For you dtec guys
Replies: 0
Views: 1973

2008 Mazda mx5 long block. For you dtec guys

I have a 2008 Mazda mx5 longblock for sale with 12,000 miles on it.

Benefits over standard 2.0:
Variable valve timing
Forged crank
Forged Rods
Stock 180 hp vs 130 is for the standard 2.0
2.0 vs 2.3 is easier to fit due to 1/2" shorter block

May stick it in my car, maybe not

$800
by mopman93
Sat Nov 26, 2016 11:52 pm
Forum: Classifieds - XR4Ti
Topic: Master cylinder, oil coolers, bellhousing
Replies: 4
Views: 1187

Re: Master cylinder, oil coolers, bellhousing

Master pending

Have other misc stuff. Engine crap. Good iac valves for $5 a pop. Clear it out

Thanks
by mopman93
Sat Nov 26, 2016 11:27 pm
Forum: Classifieds - XR4Ti
Topic: Master cylinder, oil coolers, bellhousing
Replies: 4
Views: 1187

Re: Master cylinder, oil coolers, bellhousing

Yea stock oil coolers
by mopman93
Sat Nov 26, 2016 5:24 pm
Forum: Classifieds - XR4Ti
Topic: Master cylinder, oil coolers, bellhousing
Replies: 4
Views: 1187

Master cylinder, oil coolers, bellhousing

Good used 89 master cylinder. sold.

Oil cooler setup with elbow $50 shipped

Oil cooler without elbow $30 shipped

Turbo coupe bellhousing with fork and cover $100

Upper intake best offer
by mopman93
Tue Aug 09, 2016 8:22 am
Forum: Classifieds - XR4Ti
Topic: Duratec DCOE setup
Replies: 0
Views: 1588

Duratec DCOE setup

There has been some interest in my duratec setup so I thought I'd throw it up here. On a 2.0 you can get about 185 hp N/A with this setup. I drive it every day, get mid 20's for mpg, could get more if you spent more time on a dyno with it. Contents: - 2x Weber DCOE 45 152 G carbs. These are the "ger...
by mopman93
Tue Jul 26, 2016 8:07 pm
Forum: Classifieds - XR4Ti
Topic: FS: XR gas tank
Replies: 0
Views: 1851

FS: XR gas tank

I have a good rust free xr gas tank. Located in CT $100 obo.
by mopman93
Tue Jul 26, 2016 7:17 am
Forum: XR4Ti
Topic: Hydraulic clutch
Replies: 3
Views: 1656

Re: Hydraulic clutch

It's worth it. Burton power sells a pedal box modified with a hydraulic slave. It may be on an exchange basis. Having done a setup with an aftermarket pedal assembly, and seen the amount of work a friend of mine did with an aftermarket setup, I would go with the burton power. If you are using a turb...
by mopman93
Mon Jul 25, 2016 3:22 pm
Forum: Classifieds - XR4Ti
Topic: FS: 17x7.5 O.Z. Racing Wheels
Replies: 0
Views: 2182

FS: 17x7.5 O.Z. Racing Wheels

FS: 17x7.5 ET 33 O.Z. Racing Monte Carlo wheels. 205/45/17 Continental Extreme Contact tires. Will need centering rings to be hub-centric. Not bent, no rash, caps included. $500 located in CT Pictures of car about 1" lower than stock. 10.5" 300 lb springs in rear with 5/16" spring pad. No spacers ht...
by mopman93
Tue Apr 19, 2016 11:33 am
Forum: XR4Ti
Topic: Ground control coil over kit
Replies: 11
Views: 3287

Re: Ground control coil over kit

Ground control makes good stuff. You won't be disappointed
by mopman93
Fri Apr 08, 2016 1:44 pm
Forum: XR4Ti
Topic: Passenger rear wheel wobble
Replies: 3
Views: 1104

Re: Passenger rear wheel wobble

wheel bearing
by mopman93
Tue Apr 05, 2016 1:50 pm
Forum: XR4Ti
Topic: Supra Diff Install with pictures
Replies: 10
Views: 3556

Re: Supra Diff Install with pictures

Yeah, Idk about the overhang, doesn't bother me for now. I will be doing the rtv as well, seems like a good enough solution. I have to say after driving with the new diff the car is much more enjoyable. Most of it can be attributed to switching from 3.36's to 4.30's but since this was made possible ...