Search found 1364 matches

by In XS 7
Mon Jul 16, 2012 11:15 am
Forum: XR4Ti
Topic: NSS hook up
Replies: 5
Views: 2002

Re: NSS hook up

Thank you Brad and Mike,Thank you very much,great info,I will try to sort the wires to find out which ones are for the back up light and which ones for the NSS.Thanks again.
by In XS 7
Mon Jul 16, 2012 4:20 am
Forum: XR4Ti
Topic: NSS hook up
Replies: 5
Views: 2002

NSS hook up

Hello,It's me again,(with more questions :? )I just notice that there is a two pins sticking out on the left side of the T5 very close to the hole for the speedo gear,this pins have a cable with two wires hooked up,it is the neutral safety sensor? and where/how should I connect it to? my XR is an st...
by In XS 7
Thu Jul 12, 2012 1:42 am
Forum: XR4Ti
Topic: Clutch cable hooked up
Replies: 10
Views: 2855

Re: Clut cable hooked up

tvissoc wrote:Image
Thank you very much,with these pictures there is no way I can do it wrong. :D, everything gonna be just great. :headbang
by In XS 7
Wed Jul 11, 2012 12:47 pm
Forum: XR4Ti
Topic: Clutch cable hooked up
Replies: 10
Views: 2855

Re: Clut cable hooked up

Sounds like you're missing a critical piece, the clevis and the pin to hold it to the arm on the transmission. http://www.merkurxr4ti.com/ebay/bigballcableadapter.JPG You can get a new one from the vendors here or make your own. When doing my T5 swap, I used a piece of flat stock, bent it, drilled ...
by In XS 7
Wed Jul 11, 2012 8:11 am
Forum: XR4Ti
Topic: Sudden misfire and detonation. Help!
Replies: 7
Views: 2026

Re: Sudden misfire and detonation. Help!

Coolant was maybe two cups low. Temps are fine-below half way. Distributor is in place, not loose, so I don't know how timing could unset itself. EGR would be shut off under boost, right? How would low compression cause the detonation? I can understand the misfire, but it comes and goes, too. The d...
by In XS 7
Wed Jul 11, 2012 4:00 am
Forum: XR4Ti
Topic: Clutch cable hooked up
Replies: 10
Views: 2855

Re: Clut cable hooked up

http://forum.merkurclub.com/forum/viewforum.php?f=30 It should be pretty straight forward. Clutch cable goes through the hole in the bellhousing. Ball sits inside clevis. Clevis is attached to the arm on the bellhousing. That's my problem,I am not sure what hole,and now I have another question: Sin...
by In XS 7
Wed Jul 11, 2012 3:31 am
Forum: XR4Ti
Topic: Hey guys I have a no-start problem. Parked at university
Replies: 8
Views: 2454

Re: Hey guys I have a no-start problem. Parked at university

I had that problem with my XR last two weeks I have to leave it on the parking lot at work 4 times,but I just clean the ground bolts to the chassis and motor,replace the ground cables and ground straps with new ones and now my car starts right away every single time and very strong charge, I hope it...
by In XS 7
Wed Jul 11, 2012 3:16 am
Forum: XR4Ti
Topic: Borla or Magnaflow?
Replies: 30
Views: 7356

Re: Borla or Magnaflow?

Thank you to all of you, your opinions and info. are greatly appreciated. Again Thanks a lot. :cheers
by In XS 7
Tue Jul 10, 2012 12:05 pm
Forum: Project, Photo & Video Phorum
Topic: Finally an XR owner! 1986 Azure Blue XR4Ti
Replies: 8
Views: 3794

Re: Finally an XR owner! 1986 Azure Blue XR4Ti

:D Beautiful,someday mine will looks like yours. :cheers :wink:
by In XS 7
Tue Jul 10, 2012 4:04 am
Forum: XR4Ti
Topic: Clutch cable hooked up
Replies: 10
Views: 2855

Clutch cable hooked up

Hello guys,can somebody link a picture of how the clutch cable is hooked up at the bell housing fork? please. I never did it before and I am not sure if I got every thing on my fork or if I have some parts missing. I really don't know for sure how to do it at the fork,Thanks again.
by In XS 7
Tue Jul 10, 2012 2:34 am
Forum: XR4Ti
Topic: WOT?
Replies: 2
Views: 936

Re: WOT?

:D Thank you so much Khan.You are of so much help. :cheers
by In XS 7
Mon Jul 09, 2012 4:01 pm
Forum: XR4Ti
Topic: WOT?
Replies: 2
Views: 936

WOT?

Hello guys,I have a very dumb question,but I am not used to all the terms and definitions, What WOT means? :oops: I know all of you are good on these things but I'm learning everything for the first time,and so far so good,I'm fixing my XR and everything is coming out just great thanks to your advic...
by In XS 7
Sat Jul 07, 2012 9:36 pm
Forum: XR4Ti
Topic: Bolts on?
Replies: 3
Views: 1216

Re: Bolts on?

Thank you very much. :D
by In XS 7
Sat Jul 07, 2012 1:31 pm
Forum: XR4Ti
Topic: Bolts on?
Replies: 3
Views: 1216

Bolts on?

More questions in my head,I'm learning a lot about my XR4Ti,what means the term:"Bolts on modification",many times I have saw the guys saying "my car mods include:bolts on,etc,etc,...."can you guys tell me what that means please?. Thank you very much.
by In XS 7
Sat Jul 07, 2012 2:41 am
Forum: Buyer/Seller Feedback
Topic: prossi
Replies: 2
Views: 2592

Re: prossi

Good to know,what other things they have for sale?what is the web page or where can I look at the stuff?