The Merkur Club of America Forums

Aspire
Bobcat
Comet
Durango
Econoline
Fairmont
Granada
Highlander
Impreza
Jk
K car
Lightining
Mark8
Nova
Omega
Pacer
Quattro
Rebel
Svo
Tempo
Up lander
Volt
Windstar
Xr4ti
Yj
Zephyr


done!

Thanks Ben! what about any of the springs and that plate?

I use ALL MSD on my car. MSD TFI coil,MSD wires and MSD Digital 6+ box. Love it all. Been using all of these parts for over 4 years and only problem I have ever had was a bad BlasterII coil. If you plan on goin over 20psi I recomend goin with an aftermarket box.

Here is what I found inside today. Anyone have a set of the small spider gears for one of these?

Dont put a penny into the T9 setup. The T5 swap is a bit of work but soo worth it once its done!!

Well today I ordered a solid beam kit,solid diff mount and 700lb rear springs. I am rippin it apart tomorrow and looks like I will be stickin my old stock open 3.64 diff back in for now. Once the rear is done and I get it back on the road I will order the 200lb front springs and do them next. I know...

Mine blew up last weds. At the drag strip it wheel hopped just a tad outa the hole and then BOOM. Its dead.

Wanna build another?

I have had a few guys that were there offer me their slicks at the end of the season for me to get started next season. And by hackin up the car I was meaning stuff like rippin the seats out,welding cages or braces inside. I did some reading on MC2 site and never realized that I could do a coilover ...

most novices are "switches" and too abrupt with their inputs. full throttle, off throttle, full brake, full throttle, etc. too sharp steering inputs, as well. Basically, they overdrive the car. Were you there watchin me?? Thats how I drove to the T. I will do one more event on these stree...

I did my first auto cross yesterday and loved it. Outa 40 some cars I was second to last tho! My XR is my daily driver and go to work car so keeping that in mind I am lookin for some easy upgrades to improve the handling without giving up anything in the daily commute. I know I need some R compounds...

call me crazy but I like it!

What front hoses do most people use with the Mustang calipers?

Yeah the brakes are going to be the next project 4 sure!

To bad my work schedule wont allow me to make to Calisle this year....again.

Well it turns out my H1C is really a H1E compressor with a HX40turbine housing!! Guess that explains the lag! I have been workin on it all week and it gets better by the day. The 35lb injectors are not cutting it even with boost at 22psi. I have only made a few quick pulls rollin from 2nd or 3rd gea...

My $.02 Get a wide band of your own. The single best thing you can buy for your car hands down.Having your a/f ratio off by just 1.0 will make huge power differences. I would not recomend playin with an adjustable fuel reg without being able to see what your a/f is doing. You ever done a headgasket ...