Thinking about selling it.. 89 XR

javierswheels · Post by **javierswheels** » Tue Aug 12, 2008 10:50 am

Hello to all my new friends,

My name is Javier from Lehigh Acres, Florida. I'm the owner of BESTWHEEL Custom in Fort Myers Florida. Done, Done, Done with the Xr , The Big Holset turbo is in.With the 4" down pipe Big front mount intercooler 75lbs injet.. and alot more STUFF!!!! New Suspension, Big brakes just about everthing is new on this car Very Happy...
I've had this car back from 89 2 owner..the car only has 72K

I need help with post some pic's???

grve66 · Post by **grve66** » Tue Aug 12, 2008 2:56 pm

What up Javi,
I will post your pictures when I get home.

Javiers car is a real clean silver 89. Me and him go way back and have owned XR's since 92. Now if we can just get Jorge on here.....LOL
He has another Clean 87 motorsport shell.

Old rims and intercooler

javierswheels · Post by **javierswheels** » Tue Aug 12, 2008 4:33 pm

Hey friends,

Clik on the link a take a look at my XR..
http://viewmorepics.myspace.com/index.c ... Id=1829623

javierswheels · Post by **javierswheels** » Tue Aug 12, 2008 7:24 pm

{%@..;. sory the link is not working will try to put pic's up soon....

Mike McCreight · Post by **Mike McCreight** » Tue Aug 12, 2008 11:13 pm

Hi, Javier!
Haven't heard from you in a while!
Post up your wheel/tire combinations for the XR...
Keep in touch!
Mike.

grve66 · Post by **grve66** » Wed Aug 13, 2008 4:16 pm

hooked ya up

javierswheels · Post by **javierswheels** » Wed Aug 13, 2008 5:31 pm

Hey !!! Thank you....

It was Crazzy today at the shop!!! Hey Bret did you get pic's from MSpace
I have more pic's try to get one off the new wheels
at the back of the shop..

More pic's @ http://www.myspace.com/javierbestwheel

SoKalXR · Post by **SoKalXR** » Thu Aug 14, 2008 12:05 am

That thing is PIMP-TASTIC!

All you need to do is pull side cladding off and put the Cossie gear on there.

My only question about this build is do you have any issues with the Intercooler or the exhaust scraping? They look very low.

Post by **John Brennan** » Thu Aug 14, 2008 2:16 am

Beautiful car! Thanks for posting.

javierswheels · Post by **javierswheels** » Thu Aug 14, 2008 10:11 am

SoKalXR wrote:That thing is PIMP-TASTIC!

All you need to do is pull side cladding off and put the Cossie gear on there.

My only question about this build is do you have any issues with the Intercooler or the exhaust scraping? They look very low.

Thank's for the PIMP-TASTIC...LOL..
On the old set up the only the car was not lower it was stock hight. The old intercooler that i got from XS power RX7 front mount with some mods i got it to work, only the hoses rub when going up a drive way.
The exhaust is fine.

But now i have a new set up XS power RS500 Front mount with some mods (like always) and also the car now has BAT spring with a new exhaust also ( no scraping at all ) still have 5-6 inchs..

Also know that the pipes for the RS500 intercooler run on top.

javierswheels · Post by **javierswheels** » Thu Aug 14, 2008 1:20 pm

All those that are L@@king for wheels for the XR let me know. I know very well what works on the XR..

Javier..

turbopimp · Post by **turbopimp** » Fri Aug 15, 2008 8:37 pm

Nice XR!! digging the 4 inch DP

Frag · Post by **Frag** » Sat Aug 16, 2008 9:31 pm

Hows the spool on that thing? I'm assuming the head is pretty stock right? I have an HE351 I would like to try but I'm going to stick with a T3 for now.

javierswheels · Post by **javierswheels** » Mon Aug 18, 2008 10:27 am

The car is not tuned ... So i don't know how is going to run will keep you posted later..

The Head is BONE Stock.. car only has 74k

The Merkur Club of America Forums

Thinking about selling it.. 89 XR

Thinking about selling it.. 89 XR

New pic's

?