XR LED upgrades (Interior, Exterior, etc)

Special deals from our sponsoring vendors.

Moderators: John Brennan, DPDISXR4Ti

Cleat
Newbie
Newbie
Posts: 35
Joined: Wed Oct 12, 2005 9:22 am
Location: Brockville, Ontario

Re: XR LED upgrades (Interior, Exterior, etc)

Post by Cleat » Mon Mar 06, 2017 5:47 pm

Regular stock bulb.

Gives me just enough load for the flasher to be happy.

I was able to squeeze a clear 1156 LED bulb in the footwell, dome (with a modified setup using footwell light fixture), rear hatch, and underhood locations.

Nice and bright.

GT350RS
Newbie
Newbie
Posts: 20
Joined: Mon Nov 27, 2017 8:52 am

Re: XR LED upgrades (Interior, Exterior, etc)

Post by GT350RS » Tue Nov 28, 2017 5:40 pm

Interested in the cluster bulbs and Clock bulbs. Do you want the old sockets first or can they be sent after the swap?
'87 XR4Ti - Blue Grey Metallic - Moonroof - All Original - 98K mi
'16 GT350 - Triple Yellow - Black OTS - Lund Tuned
'17 Focus RS - Stealth Grey - FR Tuned
'05 S2000 - Suzuka Blue - All Original - 34k mi
'02 A4 3.0 Quattro - Light Silver - All Original - 68K mi

DAReese
Level 7
Level 7
Posts: 1274
Joined: Tue Jul 17, 2012 2:36 pm
Location: North Canton, Ohio

Re: XR LED upgrades (Interior, Exterior, etc)

Post by DAReese » Thu Nov 30, 2017 12:53 pm

SvoSierra wrote:
Sat Jun 27, 2015 9:55 pm
Information: If you are going to run LED turn signals, here is the modification needed for the STOCK flasher relay behind the dash. If you need more info on finding it, look in your shop manual. Carefully open the STOCK relay and snip the lead on the integrated circuit as shown in the photo. Easy as that, no $30 special relay needed.

Image
For those doing the LED swap, Superbrite LED has a flasher that is plug and play that eliminates the need to dissect and rely on a thirty-year old flasher for $12.97. e-Bay has them for even less. EP-27 is the one I got, works fine. The only issue I have is the noise is less than OEM, so you can't always hear that your turn signals are on, especially with a 3" exhaust.
David Reese

88 XR4Ti - mono white T5, someday to be bi wing
89 Scorpio - waiting on some parts before it hits the road again
88 XR4Ti - mono red C3, parts car
used to own 86 dark blue traded in on a min van, what was I thinking?

Jayrod82
Posts: 1
Joined: Thu Aug 09, 2018 10:11 pm

Re: XR LED upgrades (Interior, Exterior, etc)

Post by Jayrod82 » Thu Oct 11, 2018 11:28 pm

Howdy! are you still making the Dash cluster LED's? if so how do I order a set?

James Wieler
Level 4
Level 4
Posts: 426
Joined: Sat Jun 19, 2010 8:42 am
Location: Dublin, CA

Re: XR LED upgrades (Interior, Exterior, etc)

Post by James Wieler » Sun Oct 14, 2018 10:12 pm

Can anyone advise on how to remove the dome light cover? I hear they are brittle so I want to make sure I'm prying on the right spot.
thanks
James
T3/T40E-50 trim, 3" exh, FMIC, gutted/rotated upper, ported lower intake,60mm T'body,big valves,big VAM,LA3,1990 5.0L WC T5 0.82 5th gear, Cossy sway bar, Powerflex, Dynalites, Focus SVT rotors,Koni yellow sleeve over 8"x300lb/in springs,Scorch bumper cover, 17x7.5x40mm Binno wheels, 225/45-17 Kumho 712 tires

Post Reply