JVAB front brake hats in 5x112 and 4x108

Scorpio cars and parts - Please state your asking price and item location. Preface wanted ads with "WTB" in the subject.

Moderators: John Brennan, DPDISXR4Ti

Post Reply
timxr8
Level 5
Level 5
Posts: 619
Joined: Mon Feb 12, 2007 11:39 am
Location: Milton, FL

JVAB front brake hats in 5x112 and 4x108

Post by timxr8 » Mon Dec 07, 2015 1:18 am

Here is a pair of JVAB front hats for either the Scorpio in 5x112 or the XR/Sierra/late Euro Scorpio 4x108 bolt patterns. They are 8x7" rotor bolt pattern and .875" offset. They were mounted, but not actually used. I had these on the rear (requires hubs to be turned down to fit), but I found his rears will work out better. $250 shipped: the price is his price not including machining for the 5 lug.

Image

And here's the front of my XR (with Scorpio spindles). Whole setup costs about $1000 (Wilwood Forged Superlite 4 Radial calipers-$460, brackets-$128, hats-$250, Afco 12.19 Rotors-$100, fittings and hoses-$70). Brake ears are tapped to 7/16 UNF.

Image
Tim Spencer
1988 XR4Ti Duratec project car
2011 Taurus SHO daily driver...not stock.

BlackBart
Newbie
Newbie
Posts: 39
Joined: Mon May 03, 2010 8:39 pm
Location: Bloomington, NY

Re: JVAB front brake hats in 5x112 and 4x108

Post by BlackBart » Wed Dec 23, 2015 2:36 pm

Tim, Are you selling the whole front setup?

John V
Level 7
Level 7
Posts: 1033
Joined: Sun Aug 17, 2008 1:42 pm
Location: Sleezattle, WA, USA

Re: JVAB front brake hats in 5x112 and 4x108

Post by John V » Wed Dec 23, 2015 4:24 pm

BlackBart wrote:Tim, Are you selling the whole front setup?

Just the hats.
John Vanlandingham
Sleezattle WA USA
CALL =-> (206) 431-9696 <-= CALL

http://www.rallyrace.net/jvab/

timxr8
Level 5
Level 5
Posts: 619
Joined: Mon Feb 12, 2007 11:39 am
Location: Milton, FL

Re: JVAB front brake hats in 5x112 and 4x108

Post by timxr8 » Thu Dec 24, 2015 12:07 pm

BlackBart wrote:Tim, Are you selling the whole front setup?
I can assemble the whole setup if you want, but I can simply just give you all the part numbers. It'll be all brand new. Can be done with 12.19" or 11.75" rotors (common circle track rotors). Costs change though. PM me and we'll talk.
Tim Spencer
1988 XR4Ti Duratec project car
2011 Taurus SHO daily driver...not stock.

Post Reply