The Merkur Club of America Forums

The MCA forums are a public service offered by the club devoted to promoting the enjoyment and preservation of the Merkur Scorpio and XR4Ti
MC2 Racing
It is currently Mon Mar 27, 2017 6:36 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Mon Mar 20, 2017 9:02 am 
Offline
Level 2
Level 2
User avatar

Joined: Mon Oct 19, 2009 11:02 pm
Posts: 110
Location: Hebron, CT
I would like to sell my Supra differential and associated conversion pieces. I have run this setup for about 15k miles without any issues. It is a 4.3 ratio open differential out of a mk3 supra. I chose the open diff because I was going to add an aftermarket e-locker rather than the OEM lsd. I pulled it apart and steam cleaned it and painted the diff. No leaks. No gear whine. The kit is the JVAB diff kit. You can see in the pictures that if you desire you can pick up two of the original diff mount bolt holes and then use two more from the mounting kit. The kit has provisions for 4 bolts with weld nuts. I have at least 3 of them and I think I know where the 4th one is.

For the drive shaft, I removed the supra pinion flange and machined it to accept a stock merkur driveshaft.

I would like $500 plus shipping for the kit and the diff. I do not want to sell separately.

I also have a merkur rear driveshaft that I had a shop weld the Toyota flange and u-joint on to. I ran this shaft for a few thousand miles and removed it to diagnose a vibration. The shaft was balanced by Houston driveshaft and I was told it was fine. I'd let it go for $50 plus shipping.

Thanks


Image

Image

Image

Image

Image


Last edited by mopman93 on Wed Mar 22, 2017 6:36 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 9:46 pm 
Offline
Level 1
Level 1

Joined: Mon Aug 20, 2007 10:26 am
Posts: 89
a CT guy nice what else you have forsale trying to get my project finished by summer..

_________________
SOLD-2.5 litre, percision sc50 turbo 60 trim, 75#injectors, P&P head with 525 lift cam, oversize stainless intake valves, inconnel exhaust valves,weisco pistons, speed pro moly rings, crower 5.5 rods,meth injection,EDIS
86 xr4ti big cam/valves. 70mm turbo need to finish..


Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 6:45 am 
Offline
Level 1
Level 1

Joined: Wed Feb 04, 2015 12:43 pm
Posts: 73
Location: Hampton Virginia
How much shipped to 23663

_________________
Its not what you build, its how you build it.
1988 Merkur XR4TI SVt Zetec Swap... Compound Turbo Setup
1986 Merkur XR4TI Stock wife's little beater


Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 7:59 am 
Offline
Level 2
Level 2
User avatar

Joined: Mon Oct 19, 2009 11:02 pm
Posts: 110
Location: Hebron, CT
pm'd.

fastfocus.... pm me and ill see if I can't help you out.


Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 6:35 pm 
Offline
Level 2
Level 2
User avatar

Joined: Mon Oct 19, 2009 11:02 pm
Posts: 110
Location: Hebron, CT
sold.


Top
 Profile  
 
PostPosted: Thu Mar 23, 2017 11:12 am 
Offline
Level 2
Level 2
User avatar

Joined: Mon Oct 19, 2009 11:02 pm
Posts: 110
Location: Hebron, CT
driveshaft still for sale. $65 shipped


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Baidu [Spider] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum


  • Advertisement

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group