1987 XR4ti parts lot liquidation.

XR4Ti cars and parts - Please state your asking price and item location. Preface wanted ads with "WTB" in the subject.

Moderators: John Brennan, Merkur

Post Reply
reddy2300
Level 2
Level 2
Posts: 104
Joined: Mon Aug 31, 2015 9:41 am

1987 XR4ti parts lot liquidation.

Post by reddy2300 » Wed Nov 15, 2017 5:32 pm

I've bought another shed full of Merkur parts. (Previous owner was literally loading them to to take them to the dump. I bought the whole lot.) Any prices are "plus shipping" or free local pickup in Columbus Ohio

All metal radiator, mediocre condition but rebuild-able. Was apparently holding coolant after the crash. --SOLD
Front hub assemblies with cross-drilled/slotted rotors and new pads. --$100 for all.
5-speed rear diff. --$100
Rear beam and trailing arms. --$75 ($125 with hubs not removed.)
ZF steering rack. (All lines intact.) --SOLD
Excellent condition gas tank with plastic protector, rock guard and fuel pump hanger/sending unit. --SOLD
3" exhaust not including downpipe.(currently on my own car.) --$100
Rust free rear hatch. --$50

Make arrangements now, to pick them up the weekend of Thanksgiving when the Ford Swap is going-on.

Btw, the best way to reach me is to email me at reddy2300@yahoo.com because I don't always make it to this site.
Last edited by reddy2300 on Tue Nov 28, 2017 4:07 pm, edited 1 time in total.
1987 5-speed XR4ti-70K mile "barn find", Rosso Red, Grant wheel, short throw shifter, PE/big VAM, 255lph pump, 3" exhaust w/Magnaflow, MD "shorty" radiator/IC, "Pony" wheels, Koni Yellow, Rapido sway bars, poly/aluminum bushes, Gillis valve,

reddy2300
Level 2
Level 2
Posts: 104
Joined: Mon Aug 31, 2015 9:41 am

Re: 1987 XR4ti parts lot liquidation.

Post by reddy2300 » Tue Nov 21, 2017 12:55 pm

Really need all of this stuff gone. Make offer, if price is too high. Used Christmas money to save it from the dump. Lol.
1987 5-speed XR4ti-70K mile "barn find", Rosso Red, Grant wheel, short throw shifter, PE/big VAM, 255lph pump, 3" exhaust w/Magnaflow, MD "shorty" radiator/IC, "Pony" wheels, Koni Yellow, Rapido sway bars, poly/aluminum bushes, Gillis valve,

User avatar
milehighXR
Level 7
Level 7
Posts: 2013
Joined: Tue Mar 23, 2004 8:17 pm
Location: Longmont, Co

Re: 1987 XR4ti parts lot liquidation.

Post by milehighXR » Mon Nov 27, 2017 6:41 pm

Any trans oil cooler line in there for the XRs C3?
Johnny


1 86 XR aka Naomi- my first love, now project car
1 14 black Fiesta SE aka Fiona- my new DD

DCLXVI

reddy2300
Level 2
Level 2
Posts: 104
Joined: Mon Aug 31, 2015 9:41 am

Re: 1987 XR4ti parts lot liquidation.

Post by reddy2300 » Tue Nov 28, 2017 4:07 pm

Nope. The car was a 5-speed.
1987 5-speed XR4ti-70K mile "barn find", Rosso Red, Grant wheel, short throw shifter, PE/big VAM, 255lph pump, 3" exhaust w/Magnaflow, MD "shorty" radiator/IC, "Pony" wheels, Koni Yellow, Rapido sway bars, poly/aluminum bushes, Gillis valve,

hybridmike
Posts: 2
Joined: Fri Jun 26, 2015 3:28 pm

Re: 1987 XR4ti parts lot liquidation.

Post by hybridmike » Mon Dec 04, 2017 7:35 pm

Hi, do you still have the rear wheel flanges and if so how much?

Thanks, Mike

reddy2300
Level 2
Level 2
Posts: 104
Joined: Mon Aug 31, 2015 9:41 am

Re: 1987 XR4ti parts lot liquidation.

Post by reddy2300 » Tue Dec 05, 2017 12:28 pm

You mean the bearing housings and stubs? I do still have those.

Asking $100 plus shipping for those. Will include backing plates, if needed.
1987 5-speed XR4ti-70K mile "barn find", Rosso Red, Grant wheel, short throw shifter, PE/big VAM, 255lph pump, 3" exhaust w/Magnaflow, MD "shorty" radiator/IC, "Pony" wheels, Koni Yellow, Rapido sway bars, poly/aluminum bushes, Gillis valve,

Ersatz36
Newbie
Newbie
Posts: 12
Joined: Tue Jul 25, 2017 2:23 pm
Location: Tulsa, Oklahoma

Re: 1987 XR4ti parts lot liquidation.

Post by Ersatz36 » Tue Dec 05, 2017 3:30 pm

Any pictures of the exhaust you could send to ketchch@yahoo.com?

hybridmike
Posts: 2
Joined: Fri Jun 26, 2015 3:28 pm

Re: 1987 XR4ti parts lot liquidation.

Post by hybridmike » Tue Dec 05, 2017 10:05 pm

No, I mean the flange that has the lug nut studs on it that slides onto the stub axle, what the wheels are mounted to.

reddy2300
Level 2
Level 2
Posts: 104
Joined: Mon Aug 31, 2015 9:41 am

Re: 1987 XR4ti parts lot liquidation.

Post by reddy2300 » Tue Dec 05, 2017 10:09 pm

The exhaust is on the car. Not sure when I'll get it swapped.
1987 5-speed XR4ti-70K mile "barn find", Rosso Red, Grant wheel, short throw shifter, PE/big VAM, 255lph pump, 3" exhaust w/Magnaflow, MD "shorty" radiator/IC, "Pony" wheels, Koni Yellow, Rapido sway bars, poly/aluminum bushes, Gillis valve,

reddy2300
Level 2
Level 2
Posts: 104
Joined: Mon Aug 31, 2015 9:41 am

Re: 1987 XR4ti parts lot liquidation.

Post by reddy2300 » Wed Dec 06, 2017 10:44 am

hybridmike wrote:
Tue Dec 05, 2017 10:05 pm
No, I mean the flange that has the lug nut studs on it that slides onto the stub axle, what the wheels are mounted to.
Yes, I do have a pair of those. That was part of the $100 I mentioned. I guess I could sell them without the bearing housings.
1987 5-speed XR4ti-70K mile "barn find", Rosso Red, Grant wheel, short throw shifter, PE/big VAM, 255lph pump, 3" exhaust w/Magnaflow, MD "shorty" radiator/IC, "Pony" wheels, Koni Yellow, Rapido sway bars, poly/aluminum bushes, Gillis valve,

reddy2300
Level 2
Level 2
Posts: 104
Joined: Mon Aug 31, 2015 9:41 am

Re: 1987 XR4ti parts lot liquidation.

Post by reddy2300 » Sat Dec 09, 2017 12:19 pm

Ersatz36--I should have the exhaust off later this week. I'll send pics, as soon as I have it on the ground.

hybridmike--Are you still needing the flanges? (Do you also need the inner part that bolts to the CV shaft as well?)

I am doing a front mount IC and need a 120 degree rotated upper intake, if someone has one they'd like to trade for parts. Or sell.
1987 5-speed XR4ti-70K mile "barn find", Rosso Red, Grant wheel, short throw shifter, PE/big VAM, 255lph pump, 3" exhaust w/Magnaflow, MD "shorty" radiator/IC, "Pony" wheels, Koni Yellow, Rapido sway bars, poly/aluminum bushes, Gillis valve,

Jkcobra
Newbie
Newbie
Posts: 5
Joined: Fri Mar 24, 2017 4:45 pm

Re: 1987 XR4ti parts lot liquidation.

Post by Jkcobra » Mon Dec 11, 2017 7:10 pm

Would you happen to have gotten a bumper cover. If you do what color.
'88 Sand Gold Solid Roof 5-Speed Spice Brown Cloth Interior, "The Gold Turd"
Saab NG900 Intercooler, Saab 9-5 radiator and fans, soon LB3 and Big VAM
Hilton, NY
Joe Kemp, Jeremy Kemp is my Dad :cheers

reddy2300
Level 2
Level 2
Posts: 104
Joined: Mon Aug 31, 2015 9:41 am

Re: 1987 XR4ti parts lot liquidation.

Post by reddy2300 » Tue Dec 12, 2017 10:17 am

No bumper covers. Car was rolled and the shell went to the scrapper months ago. I bought what was left on a flat bed trailer.
1987 5-speed XR4ti-70K mile "barn find", Rosso Red, Grant wheel, short throw shifter, PE/big VAM, 255lph pump, 3" exhaust w/Magnaflow, MD "shorty" radiator/IC, "Pony" wheels, Koni Yellow, Rapido sway bars, poly/aluminum bushes, Gillis valve,

Post Reply