Bell Housing for T-5

XR4Ti / Sierra / Sierra Cosworth Discussions - Questions, problem resolution, general talk, technical tips and modifications.
Post Reply
JimG
Level 4
Level 4
Posts: 460
Joined: Sat Jan 18, 2003 8:30 pm
Location: Waterford, Virginia

Bell Housing for T-5

Post by JimG » Fri Jan 12, 2018 1:31 pm

Does this look like the correct bellhousing to convert my XR to a T-5?
Bellhousing_0825.JPG
Bellhousing_0825.JPG (985.68 KiB) Viewed 208 times
Jim Gosses
86 XR4TI, 165K, IC, RR, PBR Fronts, T-bird Rear Discs
Image

timxr8
Level 5
Level 5
Posts: 554
Joined: Mon Feb 12, 2007 11:39 am
Location: Milton, FL

Re: Bell Housing for T-5

Post by timxr8 » Sat Jan 13, 2018 10:13 am

That is one of them. Will require the matching mustang cable as the ball end is significantly smaller than the XR. The cable linkage gets very close to the swaybar with some having actual contact with the swaybar. That one will work though.
Tim Spencer
1988 XR4Ti Duratec project car
2011 Taurus SHO daily driver...not stock.

JimG
Level 4
Level 4
Posts: 460
Joined: Sat Jan 18, 2003 8:30 pm
Location: Waterford, Virginia

Re: Bell Housing for T-5

Post by JimG » Sat Jan 13, 2018 12:36 pm

Thanks
Jim Gosses
86 XR4TI, 165K, IC, RR, PBR Fronts, T-bird Rear Discs
Image

Post Reply