blown head gasket?

XR4Ti / Sierra / Sierra Cosworth Discussions - Questions, problem resolution, general talk, technical tips and modifications.
Post Reply
Merkur Club web site
xr4tiowner
Level 1
Level 1
Posts: 78
Joined: Sat May 07, 2005 2:45 pm
Location: Arizona

blown head gasket?

Post by xr4tiowner »

I found out that my oil has water in it, and i was just wonderingif that would cause blow by?
Top
MerkXRTurbo
Level 7
Level 7
Posts: 4612
Joined: Mon May 17, 2004 11:08 pm
Location: Vancouver, WA
Contact:
Contact MerkXRTurbo

Post by MerkXRTurbo »

Yes, it is the headgasket.
3" mandrel bent exhaust, Ported/Polished head, 1.89/1.57 valves, Gutted uppper/Knife edge lower intake, T3/T4, LA3, Big VAM, Cold air intake, 40bob header, Gillis valve, Forge BOV, Mustang SVO T5, Conquest intercooler, 20psi.
Top
Specktor
Level 2
Level 2
Posts: 108
Joined: Thu Dec 29, 2005 3:48 am
Location: CT

Post by Specktor »

head gasket or the head is cracked or 5 percent chance you cracked a block. I just had my head gasket go before christmas . If it wasn't so cold I could have changed it myself as it is I'm at my the mercy of my local ford mechanic.
Top
Post Reply

Return to “XR4Ti”