Junkyard Shopping List - Feel free to contribute

Merkur Scorpio / XR4Ti Technical Library - Check here for answers to common questions, problems and modifications.

Moderator: John Brennan

Post Reply
Merkur Club web site
User avatar
milehighXR
Level 7
Level 7
Posts: 2317
Joined: Tue Mar 23, 2004 8:17 pm
Location: Longmont, Co

Post by milehighXR »

DPDISXR4Ti wrote:
Frag wrote:The other day I noticed the part you mentioned in your post about the Escort. However today I went to a different junk yard and found a triple bung pipe on a early 90's Escort with a 1.9. I found them located on the drivers side under the coil pack.

The tripple has what looks to be ECT. White ring sensor and something I have never seen before. It's simmilar to the ECT, ecept the brass arear is much larger and the plastic is green on the outside and orange on the inside.

Any idea if these are ECT. Are the cross compatable with different ECU's?
As Johnny suggested, the third one might be a fan switch, although generally those disappered from many cars in the 90's. It might also be a flow control valve, preventing warm coolant from reaching the heater core during warm weather.

Check the resistance on that ECT and compare it to the older style (the stock one found on the 2.3). My guess is that they have the same output, but clearly it's something that needs to be verified.

FWIW, the 2-bung unit I got out of the Escort has a purple-ring gauge sensor that looks identical to the infamous one used on the XR. No luck though - the resistance curve was totally different. :x
Standardize parts:shock: Why on earth would an American car company want to do that? It makes WAY too much sense.
Johnny


1 86 XR aka Naomi- my first love, now daily driven project

DCLXVI
User avatar
whitelx
Level 7
Level 7
Posts: 1209
Joined: Mon Oct 06, 2003 3:01 pm
Location: Riverside, CA
Contact:

Post by whitelx »

I'm heading to the junkyard tomorrow. What size socket is needed to pull the non-oil cooler filter adapter off a 2.3L? I want to delete the factory oil cooler from my XR.

Don't worry, I'll be installing an air-to-oil oil cooler soon, I just want to simplify the coolant lines when I put the head back on. I am using turbo couple hard tubes and they were a major PITA when I put them on the first time. Plus those 90° hoses at the cooler sucked to get the hose clamps on.

I am pretty sure I noticed a T-fitting in the heater hose on a single plug EFI 2.3L Mustang that allowed a hose to wrap around to the lower intake. I plan on getting one of those as I attempted to make a T-fitting from hardware store parts and it was HUGE. So big and heavy I was worried it would eventually damage the heater core.
1986 XR4Ti - 294rwhp/315ft-lbs
1992 Mustang 5.0 notch - 434rwhp/445ft-lbs
http://www.youtube.com/user/whitelx
User avatar
whitelx
Level 7
Level 7
Posts: 1209
Joined: Mon Oct 06, 2003 3:01 pm
Location: Riverside, CA
Contact:

Post by whitelx »

Are there any other vehicles that use the same ACT sensor/connector as the 87-88 Turbocoupes?
1986 XR4Ti - 294rwhp/315ft-lbs
1992 Mustang 5.0 notch - 434rwhp/445ft-lbs
http://www.youtube.com/user/whitelx
User avatar
Mike McCreight
Level 7
Level 7
Posts: 3987
Joined: Fri Oct 31, 2003 8:44 pm
Location: Ottawa! Well, Manotick, actually...

?

Post by Mike McCreight »

whitelx wrote:I'm heading to the junkyard tomorrow. What size socket is needed to pull the non-oil cooler filter adapter off a 2.3L? I want to delete the factory oil cooler from my XR.

Don't worry, I'll be installing an air-to-oil oil cooler soon, I just want to simplify the coolant lines when I put the head back on. I am using turbo couple hard tubes and they were a major PITA when I put them on the first time. Plus those 90° hoses at the cooler sucked to get the hose clamps on.

I am pretty sure I noticed a T-fitting in the heater hose on a single plug EFI 2.3L Mustang that allowed a hose to wrap around to the lower intake. I plan on getting one of those as I attempted to make a T-fitting from hardware store parts and it was HUGE. So big and heavy I was worried it would eventually damage the heater core.
I used sillycone hose... If you cut the hard line that's down by the oil cooler, it'll give you a nice "T" for the 3/8" hose to connect to the heater hose 5/8" hoses. I put mine at the back of the valve cover.
Image
It's not a hobby, it's an obsession!
User avatar
DPDISXR4Ti
Site Admin
Posts: 14800
Joined: Wed Jan 08, 2003 11:40 pm
Location: New York

Post by DPDISXR4Ti »

whitelx wrote:I'm heading to the junkyard tomorrow. What size socket is needed to pull the non-oil cooler filter adapter off a 2.3L? I want to delete the factory oil cooler from my XR.
Huh? :? I'm not sure what you're trying to say here. Are you asking about the sandwich plate that comes off a Volvo?

whitelx wrote:Are there any other vehicles that use the same ACT sensor/connector as the 87-88 Turbocoupes?
Early 90's Taurus will have this. It's sitting up easily accessible. 1" deep socket or box wrench will do the trick.
Brad
User avatar
whitelx
Level 7
Level 7
Posts: 1209
Joined: Mon Oct 06, 2003 3:01 pm
Location: Riverside, CA
Contact:

Post by whitelx »

DPDISXR4Ti wrote:
whitelx wrote:Are there any other vehicles that use the same ACT sensor/connector as the 87-88 Turbocoupes?
Early 90's Taurus will have this. It's sitting up easily accessible. 1" deep socket or box wrench will do the trick.
where is that located on a Taurus. I've kinda forgotten what the ACT looks like. :?
Last edited by whitelx on Sat Mar 01, 2008 11:01 am, edited 1 time in total.
1986 XR4Ti - 294rwhp/315ft-lbs
1992 Mustang 5.0 notch - 434rwhp/445ft-lbs
http://www.youtube.com/user/whitelx
User avatar
whitelx
Level 7
Level 7
Posts: 1209
Joined: Mon Oct 06, 2003 3:01 pm
Location: Riverside, CA
Contact:

Post by whitelx »

DPDISXR4Ti wrote:
whitelx wrote:I'm heading to the junkyard tomorrow. What size socket is needed to pull the non-oil cooler filter adapter off a 2.3L? I want to delete the factory oil cooler from my XR.
Huh? :? I'm not sure what you're trying to say here. Are you asking about the sandwich plate that comes off a Volvo?
Now that I am thinking about it, I answered my own question. Once I remove the stock sandwich plate, the oil filter threads right on.

I was confused thinking about the bolt that holds the sandwich plate onto the block. There is one for the turbocouple/SVO with external threads that threads the filter so it sticks straight out, then the one for the XR with internal threads for the 90° adapter. I had both when I originally put the engine together.
1986 XR4Ti - 294rwhp/315ft-lbs
1992 Mustang 5.0 notch - 434rwhp/445ft-lbs
http://www.youtube.com/user/whitelx
User avatar
DPDISXR4Ti
Site Admin
Posts: 14800
Joined: Wed Jan 08, 2003 11:40 pm
Location: New York

Post by DPDISXR4Ti »

From XRIAN....

Upper radiator hose from I4 Tempo/Topaz (good fitment for Cossie/Saab "shortie" radiator)
Of course, you could buy one of these new too (God freakin' forbid :lol: )

'99 - '04 VW Jetta SS Braided brake lines between MC and ABS pump
Last edited by DPDISXR4Ti on Sat Nov 14, 2009 12:16 am, edited 1 time in total.
Brad
Frag
Level 7
Level 7
Posts: 2256
Joined: Fri Oct 17, 2003 12:41 am
Location: Seattle, Wa
Contact:

Post by Frag »

DPDISXR4Ti wrote:From XRIAN....

Upper radiator hose from I4 Tempo/Topaz (good fitment for Cossie/Saab "shortie" radiator)

Of course, you could buy one of these new too (God freakin' forbid :lol: )
Pfft... I just snagged some good year heater hose off a big boat ford the other day.... LOL!
:)
User avatar
DPDISXR4Ti
Site Admin
Posts: 14800
Joined: Wed Jan 08, 2003 11:40 pm
Location: New York

Post by DPDISXR4Ti »

xr4man wrote:87ish saab 9000 spoiler. nearly identical to a rs500 lower.
Hey Ian, do you recall what tools are needed to remove one of these? My recollection is that the screws are Torx-headed - probably something like T-30. :dunno
Brad
86XR4Ti_John
Level 5
Level 5
Posts: 612
Joined: Sun Nov 25, 2007 2:26 pm
Location: Chilliwack, BC, Canada

Post by 86XR4Ti_John »

'90-'94 turbo Talon/Eclipse/Laser turbo intake rubber piping. The "accordian" part, when cut off to the correct shape, perfectly fits onto the stock turbo inlet and a big VAM.

Just cut with a razor knife and slap it on with clamps. Its really strong, so no issues with it being sucked closed(factory turbo car and thick).
John

86 Xr, lowered, cossie rear sway bar, wheels, intercooled, big vam, PE superchip.
91 Talon TSi, well modified, 5spd all wheel drive, runs 11's.
User avatar
xr4man
Level 6
Level 6
Posts: 921
Joined: Mon May 09, 2005 1:01 pm
Location: Fort Worth, TX
Contact:

Post by xr4man »

DPDISXR4Ti wrote:
xr4man wrote:87ish saab 9000 spoiler. nearly identical to a rs500 lower.
Hey Ian, do you recall what tools are needed to remove one of these? My recollection is that the screws are Torx-headed - probably something like T-30. :dunno

you need a torx driver for the two screws on the plastic brackets that come over the edge of the hatch and a 8mm socket for the 5 nuts under the spoiler itself. i think they were 8mm, there's a chance they could be 10mm.

the torx driver is either t25 or t30 i believe.


and who changed the url of the forum on me? it's taken me two days to figure it out.
ian the re-animator
User avatar
DPDISXR4Ti
Site Admin
Posts: 14800
Joined: Wed Jan 08, 2003 11:40 pm
Location: New York

Post by DPDISXR4Ti »

Thanks Ian. No change on the forum address. Whatchu talkin' 'bout Willis? :?
Brad
Teedyo
Level 2
Level 2
Posts: 104
Joined: Tue May 26, 2009 7:11 pm
Location: Montana

Post by Teedyo »

DPDISXR4Ti wrote:Thanks Ian. No change on the forum address. Whatchu talkin' 'bout Willis? :?
He's talking about the change from www.merkurclub.com/forum/ to forum.merkurclub.com/forum/

As if you were blissfully unaware. ;)

Why would anybody retrieve coolant hoses from a junkyard??? That's just asking to be left stranded.
--
Tim
User avatar
grondie
Administrator
Posts: 166
Joined: Thu Jul 01, 2004 6:25 pm
Location: Burlington, NJ
Contact:

Post by grondie »

Teedyo wrote:
DPDISXR4Ti wrote:Thanks Ian. No change on the forum address. Whatchu talkin' 'bout Willis? :?
He's talking about the change from www.merkurclub.com/forum/ to forum.merkurclub.com/forum/

As if you were blissfully unaware. ;)

Why would anybody retrieve coolant hoses from a junkyard??? That's just asking to be left stranded.
That happened awhile ago when the forums moved to a different server. I think it's been over a year :)
Bob in NJ

85 White XR / 85 Nimbus Gray XR / 88 White XR Automagic! / 89 Black Scorpio
Post Reply