Carlisle 2013 Buy/Sell/Trade
- DPDISXR4Ti
- Site Admin
- Posts: 14824
- Joined: Wed Jan 08, 2003 11:40 pm
- Location: New York
Carlisle 2013 Buy/Sell/Trade
Carlisle is a great time/place to buy and sell Merkur-related parts - after all, you're already there any way! It's especially helpful when buying/selling parts that are big and/or heavy, and thus difficult/expensive to ship.
If you have any parts you want to Buy/Sell/Trade, post them up in this thread so everyone will know what they should bring to the event (parts and/or cash!).
Please keep comments to a minimum - this thread is not for banter, but rather for listing your items for sale (FS) or wanted to buy (WTB). In fact, please preface in the subject heading with "FS" or "WTB" accordingly (I guess I should add, "WTT" if you want to trade something). If you want to communicate with a person who has posted in here, please take it to PM and arrange payment details and when/where to meet up. I'd also suggest exchanging cell phone #'s so it's easy to track each other down.
Ready, set, go!
If you have any parts you want to Buy/Sell/Trade, post them up in this thread so everyone will know what they should bring to the event (parts and/or cash!).
Please keep comments to a minimum - this thread is not for banter, but rather for listing your items for sale (FS) or wanted to buy (WTB). In fact, please preface in the subject heading with "FS" or "WTB" accordingly (I guess I should add, "WTT" if you want to trade something). If you want to communicate with a person who has posted in here, please take it to PM and arrange payment details and when/where to meet up. I'd also suggest exchanging cell phone #'s so it's easy to track each other down.
Ready, set, go!
Brad
- merkurdriver
- Level 8
- Posts: 6365
- Joined: Tue Jan 21, 2003 4:29 pm
- Location: Northeast Ohio
- Contact:
FOR SALE : MERKUR DEPOT PARTS
Fantasic idea as Carlisle 2012 was the largest Merkur swap meet that I have ever seen.
I'll edit/update this post as the time draws nearer and nearer. But I'll take this time to say I can bring any part from our inventory with me. Fenders (NOS and used), bumpers, grilles, wheels, transmissions, dashes, seats, etc. etc. etc.
CARLISLE SPECIAL DEAL - 10% OFF ANY ITEM ON THE WEBSITE http://www.merkurdepot.com Special offer only for Carlisle attendees paying with cash.
We will be arriving Saturday morning again this year and set up in the hotel parking lot as per usual. Any items not paid for/collected by Sunday morning will be offered to the person "second in line" who showed interest. So, even if something appears to be spoken for, please state your interest as second.
Thanks to modern technology we will be able to swipe credit cards on site right there in the parking lot! Paypal payments also possible on site as well. Cash is always preferred however as we don't get hit with the transaction fees.
For Carlisle weekend only we will be offering new NOS XR and Scorpio front fenders for only $100 each! (pics and regular price shown at http://www.merkurdepot.com)
This is $30 off the Scorpio Fenders and $70 off the XR4Ti Fenders!
NICE low miles Subaru WRX front seats - $250
4x4 T-9 Trans w/ transfer case - XR or Scorpio fittiment - $550 <SOLD!>
From a european 2.9 V6 4x4 car, so input shaft is Scorpio friendly at the moment. Want to stick this behind a 2.3 / XR4Ti? Mechanically simple enough - either change the input shaft to an XR T9 input shaft OR remove the transfer case and rear tail section from this box and bolt it in place of the standard tailhosing on your existing T9 XR4Ti box.
Rare piece to see here in the US! Local pick up gets priority and first dibs until June, once its June FREE CARLISLE DELIVERY is available. Only if its still here after Carlisle will I go through they joys of crating/shipping this.
Scorpio V6 aluminum 4x4 oil pan - $250 + ship (or pick up free at Carlisle) <SOLD!>
Rare piece to find in the US!
4x4 front differential 3.62:1
$275 + ship (or free delivery to Carlisle) <SOLD!>
The Sierra 4x4 3.62:1 Front Differential was fitted to the following models:
•2.9V6 4x4 Sierra XR4x4
•Sierra Cosworth 4x4
•Escort Cosworth 4x4
•Granada / Scorpio 4x4 (1985-1991)
Special T9 4x4 crossmember and mount - $50 <SOLD!>
Driveshaft from transfer case to front diff - $50 <SOLD!>
WC T5 Transmission for sale 1352-169 tag. 3.35 gear set
$300 - pick up preferred, free Carlisle delivery, or ship at buyers expense.
Here's an excellent link that lists all the tag code info:
http://www.britishv8.org/articles/borg- ... d-tags.htm
V8 box, so if you want to put this behind a 2.3 you can either buy the special input shaft bearing from Rapido OR have the V8 input shaft turned down to match the 4cyl crank.
Good used gearbox I don't have too much history on - I bought it used along with a truckload of other parts last year.
Scorpio interior door panels good shape raven black with black leather inserts Carlisle special only $10 each - all 4 are available.
(pics soon)
Cosworth YB engine for sale. Red valve cover. 2wd engine. $3500 FIRM
93,XXX miles, complete with turbo, alternator, power steering pump, flywheel, clutch and pressure plate (T5).
Rare opportunity for a Cosworth engine here in the US! Local pick up gets priority and first dibs until June, once its June FREE CARLISLE DELIVERY is available. Only if its still here after Carlisle will I go through they joys of crating/shipping this.
No ECU or wiring harness, but I would be happy to help source the needed parts for the buyer.
Fiberglass Cosworth RS500 Front Bumper - SOLD!
Grey cloth XR front seats - $100 A little dusty with a little wear on the drivers side bolster, but otherwise a presentable set of cloth front seats.
I'll edit/update this post as the time draws nearer and nearer. But I'll take this time to say I can bring any part from our inventory with me. Fenders (NOS and used), bumpers, grilles, wheels, transmissions, dashes, seats, etc. etc. etc.
CARLISLE SPECIAL DEAL - 10% OFF ANY ITEM ON THE WEBSITE http://www.merkurdepot.com Special offer only for Carlisle attendees paying with cash.
We will be arriving Saturday morning again this year and set up in the hotel parking lot as per usual. Any items not paid for/collected by Sunday morning will be offered to the person "second in line" who showed interest. So, even if something appears to be spoken for, please state your interest as second.
Thanks to modern technology we will be able to swipe credit cards on site right there in the parking lot! Paypal payments also possible on site as well. Cash is always preferred however as we don't get hit with the transaction fees.
For Carlisle weekend only we will be offering new NOS XR and Scorpio front fenders for only $100 each! (pics and regular price shown at http://www.merkurdepot.com)
This is $30 off the Scorpio Fenders and $70 off the XR4Ti Fenders!
NICE low miles Subaru WRX front seats - $250
4x4 T-9 Trans w/ transfer case - XR or Scorpio fittiment - $550 <SOLD!>
From a european 2.9 V6 4x4 car, so input shaft is Scorpio friendly at the moment. Want to stick this behind a 2.3 / XR4Ti? Mechanically simple enough - either change the input shaft to an XR T9 input shaft OR remove the transfer case and rear tail section from this box and bolt it in place of the standard tailhosing on your existing T9 XR4Ti box.
Rare piece to see here in the US! Local pick up gets priority and first dibs until June, once its June FREE CARLISLE DELIVERY is available. Only if its still here after Carlisle will I go through they joys of crating/shipping this.
Scorpio V6 aluminum 4x4 oil pan - $250 + ship (or pick up free at Carlisle) <SOLD!>
Rare piece to find in the US!
4x4 front differential 3.62:1
$275 + ship (or free delivery to Carlisle) <SOLD!>
The Sierra 4x4 3.62:1 Front Differential was fitted to the following models:
•2.9V6 4x4 Sierra XR4x4
•Sierra Cosworth 4x4
•Escort Cosworth 4x4
•Granada / Scorpio 4x4 (1985-1991)
Special T9 4x4 crossmember and mount - $50 <SOLD!>
Driveshaft from transfer case to front diff - $50 <SOLD!>
WC T5 Transmission for sale 1352-169 tag. 3.35 gear set
$300 - pick up preferred, free Carlisle delivery, or ship at buyers expense.
Here's an excellent link that lists all the tag code info:
http://www.britishv8.org/articles/borg- ... d-tags.htm
V8 box, so if you want to put this behind a 2.3 you can either buy the special input shaft bearing from Rapido OR have the V8 input shaft turned down to match the 4cyl crank.
Good used gearbox I don't have too much history on - I bought it used along with a truckload of other parts last year.
Scorpio interior door panels good shape raven black with black leather inserts Carlisle special only $10 each - all 4 are available.
(pics soon)
Cosworth YB engine for sale. Red valve cover. 2wd engine. $3500 FIRM
93,XXX miles, complete with turbo, alternator, power steering pump, flywheel, clutch and pressure plate (T5).
Rare opportunity for a Cosworth engine here in the US! Local pick up gets priority and first dibs until June, once its June FREE CARLISLE DELIVERY is available. Only if its still here after Carlisle will I go through they joys of crating/shipping this.
No ECU or wiring harness, but I would be happy to help source the needed parts for the buyer.
Fiberglass Cosworth RS500 Front Bumper - SOLD!
Grey cloth XR front seats - $100 A little dusty with a little wear on the drivers side bolster, but otherwise a presentable set of cloth front seats.
Last edited by merkurdriver on Mon May 20, 2013 4:11 pm, edited 17 times in total.
FS Carlisle 2013 Buy/Sell/Trade
FS XR Parts
I will be bringing a few things along with me but mostly small parts. If you are interested let me shoot me a PM and i'll make sure to contact you when i get to carlisle.
2 luk Pressure plates and valeo clutch disks used.(stock replacements)
1 has <500 known miles $50 for pressure plate and disk
1 has ~3000 miles and is measured with calipers to be very close to original thickness $30 for pressure plate and disk
Super Coupe Intercooler with 2.5" steel connection pipes. I used this on my xr a while back mounted below and behind the radiator. It made a good improvement over stock. $50
I can email pictures this weekend if needed. More to be added to the list next week.
I will be bringing a few things along with me but mostly small parts. If you are interested let me shoot me a PM and i'll make sure to contact you when i get to carlisle.
2 luk Pressure plates and valeo clutch disks used.(stock replacements)
1 has <500 known miles $50 for pressure plate and disk
1 has ~3000 miles and is measured with calipers to be very close to original thickness $30 for pressure plate and disk
Super Coupe Intercooler with 2.5" steel connection pipes. I used this on my xr a while back mounted below and behind the radiator. It made a good improvement over stock. $50
I can email pictures this weekend if needed. More to be added to the list next week.
Jeremy Kemp
RIP: the Mutt….1988 XR4Ti Chestnut Brown/Spice Leather
MC2 Coilovers and Bushings, Contour Rims and Rotors, Ported Motorsport Head, Cosworth 4x4 Intercooler, Holset HY35 Turbo, 80LB Injectors, Megasquirt2 EFI
RIP: the Mutt….1988 XR4Ti Chestnut Brown/Spice Leather
MC2 Coilovers and Bushings, Contour Rims and Rotors, Ported Motorsport Head, Cosworth 4x4 Intercooler, Holset HY35 Turbo, 80LB Injectors, Megasquirt2 EFI
Winter wheels
I have a set of good condition black steel rims for an XR with worn Bridgestone Blizzacks on them. Ideal for winter use.
Anyone interested?
Paul
Anyone interested?
Paul
Paul "the Brit" West
Doylestown, PA
Doylestown, PA
Scorpio rear plactic panel
I have the trunk mounted reflector panel with the space for the number plate available.
[Update]
Here are a couple of pictures. I noticed a small crack if you catch the light right.
Paul
[Update]
Here are a couple of pictures. I noticed a small crack if you catch the light right.
Paul
Paul "the Brit" West
Doylestown, PA
Doylestown, PA
Adjustable wastegate actuator
Brand new, never used, adjustable waste gate actuator. I bought this from BAT for $85 and never used it.
Paul
Paul
Paul "the Brit" West
Doylestown, PA
Doylestown, PA
Re: Carlisle 2013 Buy/Sell/Trade
(Updated 6-3-13)
(FS)
$200 Sierra headlights (Cosworth size, no driving lights, great condition)
$200 Cosworth headlights (good condition, small crack in lens)
$175 Cosworth tinted turn signals
$150 Cosworth headlights (usable or rebuildable condition)
$120 Cosworth headlights (rebuildable condition)
$75 Cosworth fog light (orphan)
$50 Cosworth fog light lense
$100 Cosworth clear turn signals
$50 Cosworth tinted side markers
$40 Cosworth amber turn signals (cracked, functional)
$40 Cosworth clear side markers
$35 Cosworth amber side markers (with wire harness)
$30 Cosworth amber side markers (no harness)
$120 Scorpio Euro tinted tail lights
$100 great condition cruise control turn signal switch
$75 good condition non cruise control turn signal switch
$75 center panel between tail lights with “TURBO” emblem
$50 T5 transmission crossmember
$50 T5 shifter trim
$30 Sierra Sapphire window switch
$20 Functional turn signal switches, NO HAZARD
$10 XR LED converted clock (with trade)
$10 1” silicone 90* hoses
$10 1.5” silicone 45* hoses
$10 T5 NEW transmission mount
$5 T5 USED transmission mount
$5 1.5” silicone hump coupler
$5 Clock (where Tach goes)
$2 Clock bulbs (if you don’t like LEDs)
Services (not on the spot):
CV axle clean, paint, and repack (see me for more details)
$40 1 axle with new boots
$70 2 sets with new boots
$30 1 axle with re-used boots
$50 2 sets with re-used boots
Turn signal switch repair (from just functional, to fully restored depending on budget)
$50 Blower motor ball bearing upgrade
$10 Clock LED upgrade
(WTB)
2 piece T5 driveshaft for use with a guibo
Uncracked Cosworth grille, or cracked if REALLY cheap
European Sierra passenger’s tail light
Bob’s log header
Sierra Sapphire Mk2 dash switches (pushbutton style)
Sierra rear rotors
PBR front brakes (2 sets)
PBR front brake adapter (1 set)
Euro clock
16/17” 4X108 wheels (let’s see what you got)
Free old turn signal switches, blower motors, rear wiper dash switches
We should be at the taxi or nearby eating Nikoli's pizza (shameless plug for an excellent pie!)
I believe this is the complete list now.
(FS)
$200 Sierra headlights (Cosworth size, no driving lights, great condition)
$200 Cosworth headlights (good condition, small crack in lens)
$175 Cosworth tinted turn signals
$150 Cosworth headlights (usable or rebuildable condition)
$120 Cosworth headlights (rebuildable condition)
$75 Cosworth fog light (orphan)
$50 Cosworth fog light lense
$100 Cosworth clear turn signals
$50 Cosworth tinted side markers
$40 Cosworth amber turn signals (cracked, functional)
$40 Cosworth clear side markers
$35 Cosworth amber side markers (with wire harness)
$30 Cosworth amber side markers (no harness)
$120 Scorpio Euro tinted tail lights
$100 great condition cruise control turn signal switch
$75 good condition non cruise control turn signal switch
$75 center panel between tail lights with “TURBO” emblem
$50 T5 transmission crossmember
$50 T5 shifter trim
$30 Sierra Sapphire window switch
$20 Functional turn signal switches, NO HAZARD
$10 XR LED converted clock (with trade)
$10 1” silicone 90* hoses
$10 1.5” silicone 45* hoses
$10 T5 NEW transmission mount
$5 T5 USED transmission mount
$5 1.5” silicone hump coupler
$5 Clock (where Tach goes)
$2 Clock bulbs (if you don’t like LEDs)
Services (not on the spot):
CV axle clean, paint, and repack (see me for more details)
$40 1 axle with new boots
$70 2 sets with new boots
$30 1 axle with re-used boots
$50 2 sets with re-used boots
Turn signal switch repair (from just functional, to fully restored depending on budget)
$50 Blower motor ball bearing upgrade
$10 Clock LED upgrade
(WTB)
2 piece T5 driveshaft for use with a guibo
Uncracked Cosworth grille, or cracked if REALLY cheap
European Sierra passenger’s tail light
Bob’s log header
Sierra Sapphire Mk2 dash switches (pushbutton style)
Sierra rear rotors
PBR front brakes (2 sets)
PBR front brake adapter (1 set)
Euro clock
16/17” 4X108 wheels (let’s see what you got)
Free old turn signal switches, blower motors, rear wiper dash switches
We should be at the taxi or nearby eating Nikoli's pizza (shameless plug for an excellent pie!)
I believe this is the complete list now.
Last edited by SvoSierra on Mon Jun 03, 2013 10:46 am, edited 4 times in total.
XR and Scorpio blower motor rebuilding, LED upgrades, XR lock service
- DPDISXR4Ti
- Site Admin
- Posts: 14824
- Joined: Wed Jan 08, 2003 11:40 pm
- Location: New York
Re: Carlisle 2013 Buy/Sell/Trade
SvoSierra wrote:We should be at the taxi or nearby eating Nicola's pizza (shameless plug for an excellent pie!)
Thanks for this idea! viewtopic.php?f=59&t=24853
There's a time limit on how old a post can be before you're not able to edit it any more. If you run into that just PM me and I think I can adjust it.SvoSierra wrote:I'll add more to this post as time draws near.
Brad
-
- Level 4
- Posts: 396
- Joined: Sun Jun 07, 2009 10:20 pm
- Location: Suffolk, VA
- Contact:
Re: Carlisle 2013 Buy/Sell/Trade
Just posted a few items in XR/Scorpio 4sale sections; more to come........
A man meets another addict and says "oh yeah, I have a Merkur too!" and the other man says "no way!!!!! ............how many?"
- merkurdriver
- Level 8
- Posts: 6365
- Joined: Tue Jan 21, 2003 4:29 pm
- Location: Northeast Ohio
- Contact:
Re: Carlisle 2013 Buy/Sell/Trade
Looks that way as I don't see the edit button any longer for my post up there...DPDISXR4Ti wrote:
There's a time limit on how old a post can be before you're not able to edit it any more. If you run into that just PM me and I think I can adjust it.
- DPDISXR4Ti
- Site Admin
- Posts: 14824
- Joined: Wed Jan 08, 2003 11:40 pm
- Location: New York
Re: Carlisle 2013 Buy/Sell/Trade
Try now.merkurdriver wrote:Looks that way as I don't see the edit button any longer for my post up there...DPDISXR4Ti wrote:
There's a time limit on how old a post can be before you're not able to edit it any more. If you run into that just PM me and I think I can adjust it.
Brad
- merkurdriver
- Level 8
- Posts: 6365
- Joined: Tue Jan 21, 2003 4:29 pm
- Location: Northeast Ohio
- Contact:
-
- Level 1
- Posts: 64
- Joined: Fri May 03, 2013 9:28 am
WTB bi-wing hatch Re: Carlisle 2013 Buy/Sell/Trade
I would like to buy a bi-wing hatch in good condition. I will be staying at the Raddison.
edit: to clarify, I am looking for a complete hatch with complete bi-wing as I want to swap out the single wing hatch on my car.
Thanks
edit: to clarify, I am looking for a complete hatch with complete bi-wing as I want to swap out the single wing hatch on my car.
Thanks
Last edited by taylor0987 on Mon May 20, 2013 11:12 pm, edited 1 time in total.
- merkurdriver
- Level 8
- Posts: 6365
- Joined: Tue Jan 21, 2003 4:29 pm
- Location: Northeast Ohio
- Contact:
Re: Carlisle 2013 Buy/Sell/Trade
NEW XR4Ti Rocker Panels Carlisle Special $55 per side! Carlsile Pick-up only at this special price!
Set of 4 17" x 7.5" chrome rims by Image - $100
Set of 4 17" chrome rims in good condition. 2 rims have no tires, 1 rim has a good tire, and 1 rim has a bald tire. Bargain priced for Carlisle only $100 for the set of 4 - only $25 per rim!
Center caps are somewhat lost. I did have them and now I cannot find them. If I can find them...$20 for the set of 4 center caps.
REALLY NICE XR grey dash - $200
Fiberglass RS500 lower spoiler (fittiment is so-so) - $50
REALLY NICE Fiberglass RS500 upper spoiler (with all mounting hardare) - $400
Sale on both spoilers pending.
ford nutz first in line
paks second in line
Scorpio lowering "sport" springs - $175
This is a set of 4 used springs that BAT used to offer for the Scorpio. -30mm drop (approx 1.18") formely red in color they have now been freshly refinished in silver.
Scorpio sport springs are getting really hard to come across, don't let these slip by if you've been wanting a set!
XR4Ti bumper covers front or rear ONLY $25 EACH Carlisle delivery (or local pick up)
** ALL the 4x4 drivetrain stuff in the post up above has been sold, but I can't edit that post any longer so I just wanted to make a note of it here.
New NOS Scorpio under engine drip pan Carlisle special $50. Local pick up also welcome. Will ship after Carlisle if it hasnt been sold.
Outcast XR4Ti Grille & Headlight Kit for sale
Nice used kit includes the Outcast grille ( red, with black mesh installed ) with the pair of the headlights.
Looks just like the grille and headlights shown in this picture borrowed from the MCA home page:
$350 + shipping, free local pick up, or free delivery to Carlisle.
Cosworth Grille Mold for sale - make your own FG Grilles !
Nice mold ready to make fiberglass Cosworth grilles. Below is a picture of one of the grilles directly out of the mold - nice and smooth, not much work needed before its ready for paint.
Please take note that you will have to cut out the excess FG material left from the mold in the headlight and center openings.
I had someone using this mold to make grilles for us for a while, now they are no longer doing them.
$400 + shipping. Mold will pay for itslelf quickly and then start making $ for you if you decide to make grilles and sell them.
Local pick up OK, FREE delivery to Carlisle also an option.
28.5mm Cosworth front sway bar with clamps and poly bushings - $150
19mm rear sway bar with clamps and poly bushings - $150
Custom bolt-in roll bar, roll cage for the XR4Ti built by : http://rollcageguy.com
Just about the nicest bolt in cage you could hope to get for your XR. Great opportunity to pick up at Carlisle and pay no freight fees! $300
(You could pull your seats out and set this cage in your XR if you are worried about how to transport it home from Carlisle.)
Installed Pic:
Scorpio KYB front struts (gently used & freshly finished in metallic silver) - $30 ea.
Scorpio KYB rear shocks - same condition as struts - $20 ea.
XR4Ti Borla Stainless Steel "cat - back" exhaust system - $200
Hard to find "single outlet" version of the XR4Ti Borla stainless exhaust. It will never rust, so you'll never have to worry about replacing another rusty exhaust system on your XR again.
Complete used 2.3T cylinder heads w/ stock cam - $50 each, 4-5 available
Used heads pulled off running engines and stored vertically in the garage anywhere from 3 months to 3 years, Conditions somewhat unknown, but at only $50 could be a decent replacement head, or one to build up in your spare time .
Used (empty) 2.3T blocks with crank and caps - $50 each 2-3 available
COSWORTH 7.5" LSD Limited Slip Differential (3.64 ratio) - $500
Sierra RS Cosworth / RS500 diff. with heavy duty larger 108mm stub shafts (vs. stock XR 100mm stubs)
MORE CARLISLE ONLY SPECIALS:
used bare 2.3T cylinder head - $70
This one has been to the machine shop, checked for cracks, magnafluxed, etc. Great starting point for any head build.
used 1pc. Mustang Steel T5 driveshafts - $50 ea.
Have 2 of these available for those ready to do a T5 swap to their XR.
NEW 2.3T T5 clutch kits - $90 ea. ( 2 available )
Stock T5 clutch kit needed when putting the T5 behind any 2.3 - complete kit includes clutch disc, pressure plate, throw out bearing, alignment tool, etc.
used XR4Ti euro cosworth headlights only $100 per light - Carlisle pick up only!
used Scorpio euro glass headlights only $50 per light - Carlisle pick up only!
used Scorpio euro corner (turn signal) lights only $20 per light - Carlisle pick up only!
Set of 4 17" x 7.5" chrome rims by Image - $100
Set of 4 17" chrome rims in good condition. 2 rims have no tires, 1 rim has a good tire, and 1 rim has a bald tire. Bargain priced for Carlisle only $100 for the set of 4 - only $25 per rim!
Center caps are somewhat lost. I did have them and now I cannot find them. If I can find them...$20 for the set of 4 center caps.
REALLY NICE XR grey dash - $200
Fiberglass RS500 lower spoiler (fittiment is so-so) - $50
REALLY NICE Fiberglass RS500 upper spoiler (with all mounting hardare) - $400
Sale on both spoilers pending.
ford nutz first in line
paks second in line
Scorpio lowering "sport" springs - $175
This is a set of 4 used springs that BAT used to offer for the Scorpio. -30mm drop (approx 1.18") formely red in color they have now been freshly refinished in silver.
Scorpio sport springs are getting really hard to come across, don't let these slip by if you've been wanting a set!
XR4Ti bumper covers front or rear ONLY $25 EACH Carlisle delivery (or local pick up)
** ALL the 4x4 drivetrain stuff in the post up above has been sold, but I can't edit that post any longer so I just wanted to make a note of it here.
New NOS Scorpio under engine drip pan Carlisle special $50. Local pick up also welcome. Will ship after Carlisle if it hasnt been sold.
Outcast XR4Ti Grille & Headlight Kit for sale
Nice used kit includes the Outcast grille ( red, with black mesh installed ) with the pair of the headlights.
Looks just like the grille and headlights shown in this picture borrowed from the MCA home page:
$350 + shipping, free local pick up, or free delivery to Carlisle.
Cosworth Grille Mold for sale - make your own FG Grilles !
Nice mold ready to make fiberglass Cosworth grilles. Below is a picture of one of the grilles directly out of the mold - nice and smooth, not much work needed before its ready for paint.
Please take note that you will have to cut out the excess FG material left from the mold in the headlight and center openings.
I had someone using this mold to make grilles for us for a while, now they are no longer doing them.
$400 + shipping. Mold will pay for itslelf quickly and then start making $ for you if you decide to make grilles and sell them.
Local pick up OK, FREE delivery to Carlisle also an option.
28.5mm Cosworth front sway bar with clamps and poly bushings - $150
19mm rear sway bar with clamps and poly bushings - $150
Custom bolt-in roll bar, roll cage for the XR4Ti built by : http://rollcageguy.com
Just about the nicest bolt in cage you could hope to get for your XR. Great opportunity to pick up at Carlisle and pay no freight fees! $300
(You could pull your seats out and set this cage in your XR if you are worried about how to transport it home from Carlisle.)
Installed Pic:
Scorpio KYB front struts (gently used & freshly finished in metallic silver) - $30 ea.
Scorpio KYB rear shocks - same condition as struts - $20 ea.
XR4Ti Borla Stainless Steel "cat - back" exhaust system - $200
Hard to find "single outlet" version of the XR4Ti Borla stainless exhaust. It will never rust, so you'll never have to worry about replacing another rusty exhaust system on your XR again.
Complete used 2.3T cylinder heads w/ stock cam - $50 each, 4-5 available
Used heads pulled off running engines and stored vertically in the garage anywhere from 3 months to 3 years, Conditions somewhat unknown, but at only $50 could be a decent replacement head, or one to build up in your spare time .
Used (empty) 2.3T blocks with crank and caps - $50 each 2-3 available
COSWORTH 7.5" LSD Limited Slip Differential (3.64 ratio) - $500
Sierra RS Cosworth / RS500 diff. with heavy duty larger 108mm stub shafts (vs. stock XR 100mm stubs)
MORE CARLISLE ONLY SPECIALS:
used bare 2.3T cylinder head - $70
This one has been to the machine shop, checked for cracks, magnafluxed, etc. Great starting point for any head build.
used 1pc. Mustang Steel T5 driveshafts - $50 ea.
Have 2 of these available for those ready to do a T5 swap to their XR.
NEW 2.3T T5 clutch kits - $90 ea. ( 2 available )
Stock T5 clutch kit needed when putting the T5 behind any 2.3 - complete kit includes clutch disc, pressure plate, throw out bearing, alignment tool, etc.
used XR4Ti euro cosworth headlights only $100 per light - Carlisle pick up only!
used Scorpio euro glass headlights only $50 per light - Carlisle pick up only!
used Scorpio euro corner (turn signal) lights only $20 per light - Carlisle pick up only!
Last edited by merkurdriver on Tue Jun 04, 2013 11:08 am, edited 9 times in total.
Re: Carlisle 2013 Buy/Sell/Trade
Updated my list above. I believe it is complete now.
XR and Scorpio blower motor rebuilding, LED upgrades, XR lock service