And here it is mocked up. FWD Passat caliper, Jetta bracket, Focus rotor, Sierra Cosworth Hub, Scorpio bearing carrier and STA...timxr8 wrote:Right now, what is being persued is the late 90's/early 2000's VW Passat caliper. I have some Jetta brackets, which I believe will work with the Passat caliper as everything else is the same between the 2.
Here's the biggest issue. The pad rides about a 1/4" past the rotor edge. It would work, but obviously not right. Could be fixed by moving the through-holes in the bearing carrier downward. Not too sure I like that idea.
A minor issue is that the cable-end doesn't fit through the fitting, but the loop-end could just be cut off since it doesn't get used any way...