Hanlon Motorsports (HMS) to the rescue! Bob Hanlon now produces and sells a retainer made from billet steel specifically for the 3.97 T5 (part# HMS-1352-027-019R)
https://www.hanlonmotorsports.com/produ ... gg1X9dclTU
Steel Bearing Retainer now available for 3.97 WC T5
-
DPDISXR4Ti
- Site Admin
- Posts: 14840
- Joined: Wed Jan 08, 2003 11:40 pm
- Location: New York
Steel Bearing Retainer now available for 3.97 WC T5
Over the years many of us have used the WC T5 from the '87 - '93 2.3 Mustang or '87/8 Turbo Coupe when doing T-5 swaps on a XR. With appropriate rear-end gearing, it's not a bad solution. One of the challenges of this gearbox has been that it uses a different bearing retainer than the other (3.50, 3.35, 2.95) T5's. The original Aluminum 3.97 bearing retainer easily wears, and it's no longer available any way.
Hanlon Motorsports (HMS) to the rescue! Bob Hanlon now produces and sells a retainer made from billet steel specifically for the 3.97 T5 (part# HMS-1352-027-019R)
https://www.hanlonmotorsports.com/produ ... gg1X9dclTU
Hanlon Motorsports (HMS) to the rescue! Bob Hanlon now produces and sells a retainer made from billet steel specifically for the 3.97 T5 (part# HMS-1352-027-019R)
https://www.hanlonmotorsports.com/produ ... gg1X9dclTU
Brad